Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Anna
Gate installation in Anna typically runs $1,400 to $7,500 depending on the gate type, material, and whether automation is included, with most standard driveway gate installations landing between $2,800 and $4,800. We’re the crew Anna homeowners call when a builder-grade gate fails or when they want a gate done properly the first time. Our installation team serves every subdivision in Anna, from the newer tracts along Rosamond Parkway to the established streets near Anna High School. Call (430) 226-4507 for a free measure and written price, quoted and agreed before any work starts.
Here’s what Anna homeowners need to know about gate installation, written plainly.
Key Takeaways
- Anna’s clay soil heaves and shrinks seasonally, so shallow post footings fail within 2 to 3 years on many production-built homes
- Most Anna homes built between 2015 and 2024 lack conduit runs to the gate, which complicates adding automation later
- We install driveway, swing, sliding, double, and pedestrian gates, plus full automation systems
- Every installation is backed by our written 90-Day Done Right Promise
- Free estimates, no surprise billing, and a live person answers at (430) 226-4507
Why Ironworks Gate Co. Is Anna’s Preferred Gate Installation Company
We’ve spent 42 years doing one thing: driveway and estate gates. That focus is why Anna homeowners call us when their builder-installed gate starts sagging or the motor burns out two years after move-in. Victor Salinas leads our installation and automation crews, and he’s seen the same pattern repeat across Anna’s newer master-planned communities: posts set too shallow, hinges pulling free, and automation retrofitted onto gates that were never built to carry it.
Our installers work through Anna weekly. When you call, a live person answers, 24 hours a day, 7 days a week. No voicemail trees, no callbacks that never come. We quote an exact price before any work begins, and we stand behind every installation with a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Anna residents often tell us about the last contractor who left a gate half-aligned or a motor that failed the first winter. That’s exactly what our guarantee exists to prevent. We treat your gate the way we’d treat our own mother’s, which is the standard our background-checked, uniformed technicians work to on every job.
Our Gate Installation Services in Anna
We install the full range of residential gates in Anna, from simple pedestrian gates to fully automated double driveway gates. Each type gets matched to your lot, your soil, and the way you actually use the gate. Here’s what we do most often in this city.
Driveway Gate Installation in Anna
Driveway gates are the most common installation in Anna, and the most common ones we’re asked to redo. Builders often hung these gates on posts set only 24 inches deep, which is not enough for the Blackland Prairie clay. We set posts a minimum of 36 to 42 inches deep in high-strength concrete when we install a driveway gate in this area. You get a gate that opens and closes square, year after year, instead of binding up after two seasons. We also build for automation from day one, even if you’re not ready for an opener yet: we run conduit in the footing so adding a motor later won’t mean trenching through your flowerbeds.
Pedestrian Gate Installation in Anna
Pedestrian gates in Anna’s side-yard and HOA-fenced lots take a beating from both the clay movement and the wind that comes across the open prairie. We install steel-framed pedestrian gates with 14-gauge or 16-gauge metal pickets, or match the cedar style your HOA requires. Post setting matters just as much on a walk gate as on a driveway gate, so we use the same deep footings here. A square-set pedestrian gate stays latched correctly and doesn’t rub the catch post when the ground flexes.
Sliding Gate Installation in Anna
Sliding gates are the right call for Anna driveways with a slope or limited swing clearance. The clay soil matters less for a sliding gate’s operation, but the track and foundation still need proper attention. We pour a proper concrete track pad with a slight crown so water runs away instead of pooling, which matters during Collin County’s heavy spring rains. Sliding gates pair cleanly with automation from LiftMaster, FAAC, and BFT, and we stock parts for all three.
Swing Gate Installation in Anna
Swing gates remain the most popular choice for Anna driveways, particularly the double swing out style seen throughout the master-planned communities. We build swing gates with heavy-duty hinges sized for the gate’s actual weight, not the undersized builder hinges that pull free when the post moves. On double gates, we set each leaf with a slight positive camber so the gate doesn’t sag inward over time, and we align the leaves so they close flush without fighting each other.
Double Gate Installation and Gate Operator Add-Ons in Anna
Many Anna homes already have a double gate that was installed manually. We frequently add automation to these existing gates, which works well when the posts are sound. If the posts have moved, which is common in this area, we reset them first and then fit the operator. It costs less than most homeowners expect to add a capable operator like a Mighty Mule or LiftMaster LA400, and you’ll get a keypad, two remotes, and safety photocells as part of the job.
We also handle post footing replacement and resets as a standalone service, since it’s the most common repair Anna gates need. A new gate hung on a compromised post won’t be right for long.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anna
We’re certified to install and service nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Anna homeowners that matters because you won’t have to wait on a tech who only knows one brand. If we’re installing a new operator on your gate, we’ll recommend the right model for your gate’s weight, swing direction, and exposure to wind and weather, not just whatever is on the truck. Common parts for the brands we see most on Anna tract homes are stocked in our service vehicles, which keeps most jobs to a single visit.
Common Gate Installation Problems We See in Anna Homes
Anna’s housing stock has a pattern that makes gate failures here predictable, almost to the street. Over 42 years in North Texas, we’ve learned exactly what to look for.
- Shallow post footings, identical failure down the street. Production builders between roughly 2015 and 2024 set gate posts only 24 inches deep, and in the expanding clay that underlies Anna, that’s not enough. We find the same outside hinge pulling free of the same post on house after house along the same street. The fix is a deeper footing poured to 42 inches, then resetting the gate squarely on it.
- Manual gates with no conduit for automation. Many Anna homes were built with a manual gate and no conduit run from the house to the gate location. Adding an operator later means either surface-mounted conduit or a new trench. We handle both, and we run the proper wiring to code with a disconnect near the operator.
- Builder-grade operators burning out early. When a cheap operator is paired with a gate whose post has shifted, the arm binds and the motor works against the misalignment until it burns out. Replacing the motor without fixing the post is throwing money away. We fix the post first, then fit the operator, which is why our installations last.
- Post lean from seasonal clay heave. Blackland Prairie clay expands when wet and contracts when dry. Over a wet spring and a dry summer, a 24-inch post can move a full three inches out of plumb. That movement pulls hinges, twists gate leaves, and throws off the safety photocells on automated gates. We see this exact failure on Anna gates that are only two or three years old.
Pricing for Gate Installation in Anna, TX
Here are the ranges we quote most often in Anna:
| Service | Typical Range in Anna |
|---|---|
| Pedestrian gate, steel frame with metal pickets or cedar infill | $900 - $2,200 |
| Single swing driveway gate, steel or cedar, manual | $1,800 - $3,500 |
| Double swing driveway gate, manual | $2,800 - $5,200 |
| Sliding driveway gate, manual | $3,200 - $6,000 |
| Gate operator added to existing gate, including keypad and two remotes | $1,400 - $2,800 |
| Full automated driveway gate, including operator, safety photocells, and conduit | $4,000 - $7,500 |
| Post reset with deep footing pour | $650 - $1,300 |
Your actual price depends on gate width, material, whether automation is included, and the condition of the existing posts. Every estimate is free, and the price is settled in writing before any work starts. Call (430) 226-4507 and we’ll measure your gate and give you an exact quote.
We also offer a permanent 5% senior and veteran discount, a $50 credit on any repair over $250, and a free second opinion on any written estimate from another company. An $89 seasonal tune-up keeps your gate and operator running correctly through the clay’s wet and dry cycles.
We Also Serve Cities Near Anna
Our installation crews cover Anna and the surrounding communities. If you’re in Anna or nearby, we’ll come out for a free measure and written price. We serve Melissa, McKinney, Celina, and Princeton with the same installation standards and the same 90-Day Done Right Promise. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Anna locally.
Serving Anna, TX - Our Local Coverage Area
We’re based in the Anna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Anna
Yes. Your builder almost certainly set the gate posts 24 inches deep, which is standard for production builders but wrong for the Blackland Prairie clay under Anna. That clay expands when wet and shrinks when dry, and a 24-inch post lets go of the ground within two to three seasons. Our minimum is 36 inches, and we commonly auger 42 inches and pour in high-strength concrete so the post stays true through the soil’s wet-dry cycle. Call (430) 226-4507 for a free measure and exact quote.
You can. We run surface-mounted conduit or trench a proper underground line to the gate, and we fit the operator with its own disconnect and weather-protected housing. The job usually takes one visit. It’s also the most common add-on we do in Anna’s newer subdivisions, since the builders didn’t future-proof these gates. Call us for a price, and we’ll tell you exactly what the power run will cost before any work begins.
Because they were built the same way by the same builder, on the same clay. The posts were set shallow, the same hinge hardware was used, and the soil moves under all of them at the same rate. When we work on one gate in a Rosewood or Falcon Pointe subdivision, it’s normal for two or three neighbors to have the identical failure. The fix is the same for all of them: deeper footings, square-set posts, and hinges sized for the actual gate weight.
Often yes. If the operator is still good and it’s one of the brands we service, which includes LiftMaster, FAAC, BFT, Mighty Mule, and others, we can pull it, reset the post, and re-hang the gate on the corrected footing. If the motor has been working against a bound arm for long, it may already be compromised, in which case we’ll tell you before we do anything and give you a price for a replacement. The decision is yours, and the price is settled before we start.
An automated gate in Anna requires a proper electrical run with a dedicated circuit and a disconnect at the gate, plus safety photocells or an edge sensor on each leaf, and the gate must be set on properly sized posts. We build every installation to meet or exceed those local requirements, and we handle the permit coordination. Same as with any job in Anna, the price is quoted and agreed before we begin, so the inspection is a formality, not a surprise. Call (430) 226-4507 for a free measure.
Call Ironworks Gate Co. for Gate Installation in Anna
If your gate is leaning, sagging, or just wasn’t built right in the first place, our crew will come measure and give you a written price. No pressure, no surprise charges. Victor Salinas and our Installation team know exactly what Anna’s clay does to a gate, and we build for it. We’ll be there when we say, and the price is settled before a single bolt is turned. Call (430) 226-4507 today. A live person answers, any hour, any day.
Written by Victor Salinas, Owner at Ironworks Gate Co.