Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Anna
Gate repair in Anna usually means one of three things: a post that has heaved out of plumb in the Blackland Prairie clay, an automatic opener that stopped working, or a cedar gate that has sagged until it drags. Most repairs in Anna run between $180 and $650 depending on whether we’re resetting a post, replacing hinges, or repairing an opener. We’re Ironworks Gate Co., and we’ve repaired enough builder-grade gates in Anna’s newer subdivisions to know exactly what fails and why. Call us at (430) 226-4507 and a live person answers, day or night.
If you live off Rosamond Parkway or anywhere along the US-75 corridor in Anna, you already know the soil moves. That movement is the root cause behind most of the gate work we do here. We dispatch crews to Anna weekly, and we schedule most repairs within a day or two of your call. Same week service is standard for us here, not a bonus.
Why Ironworks Gate Co. Is Anna’s Preferred Gate Repair Company
Victor Salinas leads our gate repair team, and he has spent years learning exactly how Anna’s specific soil conditions affect gate hardware. That local knowledge matters more than you might think. A crew that only knows generic gate repair will swap a hinge and call it fixed. A crew that knows Anna’s Blackland Prairie clay will check the post depth first, because that hinge is going to pull out again in six months if the post is only set 24 inches deep.
We’re not a one-truck handyman operation. Ironworks Gate Co. has been repairing and installing gates for over 42 years, founded in 1984, and we’re trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when we arrive at your Anna home, we’re carrying the right diagnostic equipment and the right parts for whatever opener is on your driveway. Most jobs are completed in a single visit.
Every call to (430) 226-4507 is answered by a live person, 24 hours a day, 7 days a week. No voicemail trees. No answering service in another state. You talk to someone who can actually book your appointment and answer your questions. And every job we complete is protected by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard.
Our Gate Repair Services in Anna
Hinge & Post Repair
This is the repair we do most often in Anna, and it’s rarely as simple as bolting on a new hinge. In neighborhoods like West Crossing and Oak Hollow, the original builder set almost every gate post only 24 inches deep. Blackland Prairie clay expands when wet and contracts when dry, and over just a few seasons that cycle heaves the post out of plumb until the outside hinge pulls free of the wood. We excavate to 36 inches, pour a new footing with rebar, and reset the post so it stays put. A new hinge on a moving post is a temporary fix, and we don’t do temporary fixes.
Gate Realignment
When a gate starts dragging on the ground or won’t latch, the post has usually moved. Not always, but in Anna it’s the first thing we check. We re-hang the gate, adjust the hinges and the latch, and make sure the gate swings true before we leave. If your gate is on an automatic opener, we also re-align the operator so it isn’t fighting the gate on every cycle. Annas’s clay soil makes realignment a job that has to address the post, not just the gate leaf.
Automatic Gate Repair
Builder-installed automatic gate openers in Anna’s newer subdivisions fail early for a predictable reason: shifting posts misalign the track or the arm, and the motor burns out trying to push a gate that no longer moves freely. We repair operator faults, replace stripped gears, re-align photo eyes and safety edges, and get your gate cycling cleanly again. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, so whatever brand your builder put in, we can fix it.
Electric Gate Repair
When an electric gate stops responding, the problem is usually in the control board, the wiring, or the safety sensors. We diagnose the fault, repair or replace the failed component, and restore full function. If your Anna home is in an HOA with a shared entry gate, we coordinate with your management company on access requirements and repair standards. Call (430) 226-4507 and tell us what the gate is doing, or not doing. We’ll know what questions to ask.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anna
We work on nine major gate-automation brands, and in Anna we see a lot of LiftMaster and Mighty Mule units on residential driveway gates, with FAAC and BFT on some of the shared HOA entry systems. Because we carry common parts for all of these brands on our trucks, most repairs in Anna happen on the first visit. That matters when your gate is stuck open and your dog is eyeing the street. Call us at (430) 226-4507 and tell us your opener’s brand; we’ll bring what’s needed.
Common Gate Repair Problems We See in Anna Homes
- Heaved posts from Blackland Prairie clay. Anna’s soil expands and contracts with every rain-drought cycle, pushing shallow-set posts out of plumb. We see entire streets where every third gate has the same outside hinge pulling free, because the original builder set every post at the same inadequate 24-inch depth.
- Cedar gates sagging from failed hinges. The production builders who put up most of Anna’s housing between 2015 and 2024 used similar cedar gate specs throughout. When the post moves, the gate sags, and the hinges suffer. We repair and reinforce them so the gate hangs true again.
- Automatic openers failing as posts shift. A gate that no longer swings freely makes the opener work harder on every cycle. Motors burn out, gears strip, rollers bend. We fix the post first, then the opener, so the repair actually holds.
- Post rot from footing cracks. When the clay heaves a post footing, the crack lets water in at the base. That water sits against the wood and rots it from the bottom up. By the time a hinge pulls free, the post often needs full replacement, not just a re-set.
Pricing for Gate Repair in Anna, TX
A basic hinge replacement on a cedar gate in Anna runs $120 to $220. Gate realignment without post work runs $150 to $300. A full post reset with excavation, new 36-inch footing, rebar, and re-hanging typically runs $350 to $650 depending on access and whether we’re replacing the post or reusing it. Automatic opener repair runs $180 to $550 depending on the fault and the brand. Every job gets an upfront price, agreed before any work starts, so the number you approve is the number you pay. No surprises on the bill. We also offer a $50 discount on any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% discount for seniors and veterans. Call (430) 226-4507 for an exact quote; estimates are free.
We Also Serve Cities Near Anna
Our Gate Repair team works throughout the northeast Collin County corridor. If you’re in Melissa, McKinney, Celina, or Princeton, call us too. We schedule by geography so we can group trips efficiently and keep response times short across the whole area. The same crew that serves Anna serves your neighborhood as well.
Serving Anna, TX - Our Local Coverage Area
We’re based in the Anna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Anna
In most Anna HOAs, you don’t need approval to repair an existing gate, because you’re restoring the original condition rather than changing it. You typically do need approval if you’re replacing the gate with a different style, height, or finish. We can coordinate with your management company to confirm requirements, file the right paperwork, and schedule the work around their inspection calendar. Call (430) 226-4507 and we’ll help you sort out the approval picture before any work begins.
Anna sits on Blackland Prairie clay, a soil that swells significantly when wet and shrinks when dry. Your gate posts were most likely set only 24 inches deep by the original builder, which isn’t enough for that soil movement. Every wet season pushes the post out of plumb a little more until the gate drags or the hinges pull free. The permanent fix is a deeper footing, typically 36 inches, with rebar and proper concrete. We do that work regularly throughout Anna.
Yes. We work with HOA management companies across Anna’s master-planned communities, including shared entry gate systems and street-facing gates that fall under architectural standards. We confirm access rules, meet inspection requirements, and handle the paperwork on your end. When the HOA inspector needs to sign off, we schedule the repair so the work is done before the inspection, not after.
Signs of ice-storm damage to an automatic gate opener include a motor that runs but doesn’t move the gate, a gate that stutters or stalls mid-cycle, and bent or broken arms from ice pressing down on the gate leaf. Some damage took months to show up, as hairline cracks in gears or control boards failed under repeated cycling. If your opener hasn’t worked right since early 2021, we can diagnose it and tell you whether it’s repairable or worth replacing. Estimates are free.
The most common repair is a hinge post that has heaved out of plumb and pulled the outside hinge free of the gate. We see it repeatedly in Anna’s newer subdivisions, because the production builders installed hundreds of cedar gates with identical, too-shallow post footings on expansive clay. We reset the post to a 36-inch depth, pour a new footing, and re-hang the gate so it closes like it did the day it was installed.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Anna and the surrounding communities.
For gate repair in Anna, call (430) 226-4507. A live person answers, day or night. We’ll give you a fair price before any work begins, and we’ll stand behind the job in writing.