Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Anna
Gate parts and welding in Anna usually come down to one of two jobs: replacing hardware that was never deep enough for the clay it sits in, or welding a steel frame that the soil has finally pulled apart. We handle both, and we get to Anna homes quickly because we know the failure patterns here better than any generalist ever could. If your gate is sagging, dragging, or the post has started to lean, call us at (430) 226-4507 and we’ll come take a look. The price is set before any work starts.
Most Anna homeowners didn’t buy a bad gate. They bought a house where the builder set a gate post 24 inches into Blackland Prairie clay and called it done. That’s the real story on most of the streets we work. The Gate Parts & Welding work we do here is as much about fixing the foundation as it is about replacing the hinge or the roller.
Why Ironworks Gate Co. Is Anna’s Preferred Gate Parts & Welding Company
We’ve been in the gate trade for over 42 years, and Victor Salinas leads a crew that treats every Anna driveway like it’s our own mother’s gate. That’s not a slogan. It’s the K.E.Y.S. code we work by: Krafted right, Every time, Your home first, Standing behind it. When we weld a hinge bracket in Anna, you get a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Scheduling and dispatch for our Anna work is coordinated from our Dallas-Fort Worth office, and crews serve Anna locally. A live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree, not an answering service. You call, a human picks up. That matters when your driveway gate won’t close at 9:30 on a Thursday night and your dog is looking at the gap.
We know the streets off Rosamond Parkway, the neighborhoods along the US-75 corridor, the newer subdivisions east of FM 2862. We’ve seen the same hinge pulling free from a 24-inch post set down the same street in the same month. Homeowners in Anna don’t need a handyman with a welder attachment from a hardware store. They need a gate specialist who already understands why the gate failed in the first place.
Our Gate Parts & Welding Services in Anna
Hinge Replacement
In Anna’s tract-built communities, the outside hinge on a cedar or steel gate takes the worst beating from clay heave. When the post tilts even a few degrees, the hinge plate starts working loose from the wood or weld. We replace hinges with heavier steel and longer lag hardware than the builder used, and we re-set the post if that’s what caused the failure. A new hinge on a leaning post is just a future callback.
Post Replacement
This is the single most common repair we do in Anna. The Blackland Prairie clay under this city swells when wet and shrinks when dry, and a post set 24 inches deep moves with it. We excavate the old footing, pour a deeper concrete base, set the post plumb, and brace it. On a driveway swing gate, that means the post has to hold the full weight of the gate plus years of soil pressure. We set it to hold both.
Rail Repair
Cedar fence gates along Anna’s side yards often fail at the rail where the hinge screws bite in. The wood splits after a season or two of the gate pulling against a shifting post. We cut out the split section, sister in a new rail, and re-hang the gate. When the steel frame of a driveway gate cracks at the rail joint, we weld it back and gusset the corner so it doesn’t crack again at the same spot.
Custom Welding
Some Anna homeowners want a repaired gate. Some want a gate that never needed repair in the first place. Our custom welding covers both: repairing cracked brackets and broken pickets, and fabricating heavier frames, longer hinge plates, and proper latch mounts for gates the builder installed too light. When we weld, we weld for decades, not for the next inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anna
When a gate in Anna has an automatic opener, it’s usually a Mighty Mule, LiftMaster, FAAC, or BFT. We’re trained and equipped on nine major gate automation brands, so when we’re out for a hinge or a post and the opener needs adjustment, we handle it on the same visit. That’s the difference between a gate company and a generalist: we don’t call someone else for the motor. We fix the whole gate.
Common Gate Parts & Welding Problems We See in Anna Homes
- Outside hinge pulling free from a shallow post. The post was set 24 inches deep, the clay moved, and the hinge plate followed. We see this exact failure repeated house to house in the same Anna subdivisions.
- Slide gate rollers binding on a shifted track. Seasonal soil movement in Collin County pushes concrete gate tracks out of alignment. The rollers bind, the gate drags, and the opener burns out trying to move it.
- Builder-grade latches that no longer line up. When a post tilts even half an inch, the latch bar misses the strike plate. Homeowners in newer Anna neighborhoods call us for this constantly during dry spells.
- Post footings cracked by the February 2021 freeze cycle. That ice storm left concrete in worse shape than the hardware. We’re still seeing footing cracks from that winter in Anna, especially on north-facing gate posts.
Pricing for Gate Parts & Welding in Anna, TX
Here’s what you can expect to pay in Anna for common gate parts and welding work. A hinge replacement on a cedar or steel gate typically runs $180-$420. A post replacement, which includes excavation, concrete, and re-hanging the gate, runs $450-$950 depending on post size and whether it’s a single or double gate. Custom welding for a cracked frame or broken bracket runs $150-$500 per repair point. Rail repair runs $220-$480. Every job gets an upfront price before we turn a single bolt, and the quote you get is the price you pay. We also keep standing offers: $50 off any repair over $250, free second opinions on written estimates, $89 seasonal tune-ups, and a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Anna
Our gate parts and welding coverage extends beyond Anna to Anna‘s neighboring communities, including Melissa, McKinney, Celina, and Princeton. If you’re a few minutes outside town and need a gate post reset or a hinge that no longer holds, call us. We’ll schedule the same thorough work we do across Anna.
Serving Anna, TX - Our Local Coverage Area
We’re based in the Anna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Anna
The clay under Anna expands when it rains and contracts when it dries, which pushes gate posts out of plumb on a seasonal cycle. A post set 24 inches deep doesn’t have enough embedment to resist that movement, so it tilts, the gate sags, and the hinges start pulling free. That’s the root cause of most Anna gate failures, not the hinge itself. Call (430) 226-4507 and we’ll tell you if your post needs a deeper re-set.
Most builder-grade gates in Anna’s newer subdivisions have posts set 24 inches deep, and no, that’s not enough for the local clay. A driveway swing gate needs at least 36 to 42 inches of embedment with a proper concrete footing to stay plumb through wet and dry seasons. We reset posts to the right depth all over Anna, from the streets off Rosamond Parkway to the newer communities east of US-75.
Yes, and we do it regularly in Anna. The job usually involves mounting the opener arm to the gate and post, running power to the gate location, and setting the travel limits. Many Anna homeowners add an opener years after the build, and when we’re there, we also check whether the post is deep enough to hold the added stress. Free estimates, and the price is agreed before we start.
Because the same production builder installed all of them to the same spec, and the same Blackland Prairie clay underlies every lot on the street. When the soil heaves, the same hinge pulls free from the same 24-inch post on house after house. We’ve seen it block by block in Anna’s newer subdivisions. It’s not a coincidence, it’s a design depth problem.
If the steel post is sound and the hinge plate itself has cracked, we clean the area, weld the crack, and often add a gusset plate to spread the load. If the hinge pulled free because the post moved, welding alone won’t last: the post has to be re-set and re-plumbed first. We’ll tell you which one your gate actually needs, and the repair is covered by our 90-Day Done Right Promise. Call (430) 226-4507 for an exact quote.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Anna and surrounding Collin County communities since 1984.