Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across McKinney
If you’re calling around because a gate post is leaning after the last Clay County rain, or a hinge has sheared and the gate drags across the driveway, we can tell you exactly what you’re up against. Ironworks Gate Co. has been fixing McKinney gates since before most of the master-planned communities even broke ground. We know the soil, we know the HOA rulebooks, and we know which hinges, welds, and posts hold up in this climate. Call (430) 226-4507 for a free estimate, and a live person answers. Not a phone tree.
Why Ironworks Gate Co. Is McKinney’s Preferred Gate Parts & Welding Company
McKinney homeowners deal with something most Texas cities don’t: gates that fail because the ground underneath them won’t sit still. Blackland Prairie clay expands after spring rains and contracts hard in August. Every season, we see posts move, hinges bind, and welds crack at the joint precisely where a builder made a cost cut. We have been called into Stonebridge Ranch, Craig Ranch, and Trinity Falls enough times to recognize the failure pattern before we even get out of the truck. Victor Salinas, who runs Ironworks, has spent years building a crew that treats a gate the way a blacksmith treats a cold weld: measure twice, reinforce once, and never leave a post out of plumb.
We carry the Gate Parts & Welding tools and parts to match what McKinney’s HOA boards require. If your community uses a specific ornamental iron pattern or a precise powder-coat color, we cross-reference the architectural guidelines before we order a single picket. That is not a service add-on. Around here, it is the whole job. Done right, and backed in writing with our 90-Day Done Right Promise.
Our Gate Parts & Welding Services in McKinney
Hinge Replacement
Most McKinney gate failures start at the hinge. When a post shifts in the clay, the hinge carries load it was never designed for, and the pin seizes or the leaf bends. We remove the old hinge, inspect the post, and weld a reinforced plate if the metal has wallowed out. We keep common heavy-duty barrel hinges and strap hinges on the truck, so most hinge replacements happen same-day.
Post Replacement
The single most common call in McKinney’s HOA neighborhoods is a leaning post. A builder set the post in a shallow footer years ago, the clay heaved, and now the gate sags two inches at the latch. We cut out the old post, dig below the frost line, pour a new 42-inch concrete footing, and set a plumb replacement post. Then we re-hang the gate and adjust the operator so it cycles clean. In McKinney, a post replacement runs $450 to $900 depending on post size, finish, and how much of the surrounding concrete or stone needs to be cut back.
Rail Repair
Ornamental iron gates in East McKinney take a beating from spring high winds. The weak point is always the stile-to-rail weld, where builders used a minimal bead to save time. The rail bends or the weld snaps, the gate racks, and the latch no longer lines up. We straighten what can be straightened, then weld gussets and a sag correction bar across the top rail so the panel stops flexing.
Custom Welding
Sometimes the part you need was never made in the first place. A builder-grade gate flag bracket, a non-standard latch receiver, a decorative finial that matches a 2006-era iron pattern. We fabricate it in-house. Custom welding in McKinney generally runs $120 to $380 for a small fabrication, and more if the piece needs hand-forged scrollwork or an exact powder-coat match to a specific HOA color chip.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McKinney
Our technicians are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, Mighty Mule, and BFT. That matters in McKinney, where builders installed whatever operator was cheapest on bid day, and ten years later nobody knows how to service it. We do. If your LiftMaster swing arm is grinding in Craig Ranch or your FAAC board is throwing errors in Trinity Falls, we fix the gate and the operator on the first visit in most cases.
Common Gate Parts & Welding Problems We See in McKinney Homes
- Builder-grade operator arms stripping gears after a rainy spring. When the hinge post heaves and the gate panel sags, the operator works against the drag. The gears strip, and the operator gets blamed. The real fix is re-plumbing the post and relieving the strain – then the operator runs quiet.
- No power or conduit on a manual side gate built in the 2000s. The house predates the automation, and nobody thought to run a loop detector lead or a keypad wire. Adding a gate operator means trenching a power run through the same clay that shifts every summer. We do it properly, and we do it once.
- High-wind-raised top rails and snapped welds. East McKinney subdivisions get hammered by spring storms. Lightweight ornamental iron bends, a thin weld pops, and the gate catches on the latch post. We straighten, reinforce, and weld it back to true.
- HOA-approved finishes that fade or oxidize. The Blackland Prairie sun does a number on powder coat. We match the original black satin or oil-rubbed bronze and refinish on site so the gate looks like every other gate on the street.
Pricing for Gate Parts & Welding in McKinney, TX
Here is what McKinney homeowners can expect, based on the jobs we run week to week. Hinge replacement: $180 to $420 per hinge, including the part, the weld, and the adjustment. Post replacement: $450 to $900 as noted. Rail repair or a welded reinforcement: $160 to $500 depending on scope. Custom fabrication: $120 and up. A full-service visit that includes parts, welding, and operator adjustment typically lands between $300 and $750 for most McKinney gates. We price the job and get your sign-off before a single bolt is turned. No surprises on the bill. Call (430) 226-4507 for a written quote, and ask about our $50 Off Any Repair Over $250 or the free second opinion on any written estimate.
We Also Serve Cities Near McKinney
Ironworks Gate Co. serves all of McKinney, plus Melissa, Allen, Princeton, and Anna. If you’re in any of these communities and dealing with a gate that won’t latch, a post that’s leaning, or an operator that grinds, call us. We dispatch locally and we do not make you wait on a callback from an answering service.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in McKinney
Yes, and we do this regularly across Stonebridge Ranch and other McKinney subdivisions with architectural control. We pull the deeded guidelines, match the picket profile, the spacing, and the powder-coat color chip before we order anything. The finished gate passes the HOA review because we do not guess. Call (430) 226-4507 and send us a photo of the gate and your community name, and we will tell you if the part is available and what a match costs.
The operator is likely working against a gate that sagged when the clay heaved under the hinge post. The internals are grinding because the swing arm is pushing at an angle it was never designed for. We see this in Craig Ranch, Trinity Falls, and every other North McKinney community built on Blackland Prairie clay. The fix is re-plumbing the post and re-hanging the gate so the operator runs with zero strain. Call (430) 226-4507 for a free estimate – we quote the job before we start and back it with the 90-Day Done Right Promise.
Yes, solar operators with a keypad are a popular option for side gates in Craig Ranch, where the original build did not include conduit or a power run. We mount the solar panel, install the keypad, and program the limits. The one thing to watch is shade: if your side gate sits under heavy live oaks, the panel may not get enough charge. We can run a hardwired alternative if the solar math does not work. Call (430) 226-4507 and we will assess your gate and give you a straight answer.
Most bent top rails can be straightened and reinforced with a welded bridge or gusset, no full replacement needed. We handle this all over McKinney after the spring wind season. If the rail is creased beyond a clean pull, we can fabricate a new rail section and weld it in, matching the HOA spec. Call (430) 226-4507 for a free estimate. You’ll get a written price before any work begins.
Usually both, because the clay under the track has shifted. Once the track loses grade, the roller climbs the lip and the gate derails. We level the track, replace the roller with the correct V-groove or flat profile, and adjust the guide posts. If the track is still in usable shape, we weld any cracks at the rail joints and re-align the gate. Call (430) 226-4507 and we will diagnose it on site. Free estimates, no obligation, and the work is guaranteed in writing for 90 days.
Call Ironworks Gate Co. for Gate Parts & Welding in McKinney
If your gate is sagging, grinding, or stuck halfway across the driveway, call (430) 226-4507. A live person answers, day or night, seven days a week. Victor Salinas and the rest of our McKinney team will get you a square deal: an upfront price, no surprises on the bill, and a gate that closes like it was hung yesterday. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving McKinney and surrounding communities with gate parts, welding, and automation service.