Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for McKinney Homeowners
A new driveway gate in McKinney typically costs between $3,800 and $14,000 installed, depending on material, size, and whether you’re adding automation. Most standard steel and ornamental iron installations run $4,500 to $8,500, and we complete the majority of jobs in one or two scheduled visits. Victor Salinas and the Ironworks Gate Co. crew have been doing this work since 1984, and we quote every job before a single bolt is turned on any Best Gate Installation in McKinney, TX.
If your gate is sagging, the posts are leaning, or the opener gave out years ago and you’ve been opening it by hand ever since, you already know the feeling. It’s not just the daily inconvenience. It’s knowing that anyone can walk right up your driveway. That’s the problem we solve. Call (430) 226-4507 and a live person answers, day or night. We’ll schedule a free measure, give you a written price, and stand behind the work in writing.
What Our Gate Installation Service Includes
Every our Gate Installation in McKinney starts with the same question: what does this gate need to do for you? Keep kids and dogs in? Keep solicitors out? Hold up to Texas wind and clay soil? From there we build to spec. Here’s what each type of installation involves.
Driveway Gate
A driveway gate is the full-width entry gate across your vehicle entrance, typically 10 to 20 feet wide, built from steel, ornamental iron, aluminum, or wood with a steel frame. You need this when you want actual control over who drives onto your property, not just a visual boundary. We fabricate or source the gate to your driveway’s exact width and slope, set the posts in concrete below the frost line, and hang it so it swings or slides without dragging.
Pedestrian Gate
A pedestrian gate is the walk-through gate beside the driveway or along a side yard fence, usually 3 to 4 feet wide. It’s the gate you’ll use a dozen times a day, so the hinge work and latch alignment matter more than anything. We set these gates with self-closing hinges where code requires it (common for pool enclosures in Collin County), and we match the metal and finish to your driveway gate so the whole entry looks like it was built together.
Sliding Gate
A sliding gate rolls horizontally on a track instead of swinging open, which is the right choice for driveways that slope upward or properties where a swing gate would block the sidewalk or street. We install cantilever and track-style slide gates, set the roller trucks and receiver posts, and square the track so the gate runs quiet instead of grinding. Sliding gates also need a solid concrete foundation under the track, which we pour and finish as part of the job.
Swing Gate
A swing gate pivots on heavy-duty hinges mounted to the gate posts, either as a single leaf or a matched pair. This is the most common style in McKinney neighborhoods like Stonebridge Ranch, Eldorado, and Craig Ranch. We size the hinge barrels and post steel to the gate’s weight, because a 400-pound gate on light-duty hinges fails in a few years no matter what it looks like on day one.
Double Gate
A double gate is two leaves that meet in the middle, used for wider driveways or where a single long leaf would put too much stress on the posts and hinges. You need this when your opening is wider than about 14 feet or when the driveway layout makes one huge swinging panel impractical. We build or order both leaves as a matched set, set both posts, and adjust the meeting point so the gap is even from top to bottom.
Security Gate
A security gate is built with a different intent: slowing down or stopping someone who wants in. That means taller panels, closer picket spacing, tamper-resistant fasteners, and a heavier post system. We install security gates for estates and acreage properties around Lucas, our Gate Installation in Melissa, and the rural edges of McKinney, and we can pair any security gate with a keypad, intercom, or cellular access system so you know who’s at the entry before they get to the house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and automate gates around whatever opener is going on the post, and that means we do not have to send you to another company depending on the brand. Our technicians are factory-trained on LiftMaster and FAAC systems specifically, and we carry programming tools and diagnostic equipment for both. LiftMaster is the brand you’ll see most often on newer McKinney builds, and we stock the common boards, remotes, and safety photo eyes so we’re not waiting on a parts truck when something needs adjustment at install. FAAC is what you’ll find on heavier hydraulic and commercial-grade operators, and our team knows their 400 and 770 series well enough to set limit switches and force settings on the first trip.
We also work regularly with Mighty Mule and BFT. Mighty Mule is the most common self-installed opener we get called in to replace or reconfigure, and we set those units up to actually hold their limits instead of drifting. BFT runs a lot of the European-style slide operators we see on estate properties north of 380 around Prosper and Celina. Whatever opener is on your gate or planned for it, we can handle the install correctly the first time.
Signs You Need Gate Installation Right Now
- Your current gate drags or scrapes the driveway. When a gate starts leaving a mark on the concrete, the posts have shifted or the hinges have worn past adjustment. Adding grease buys weeks, not months. A gate that drags is a gate that will eventually stop opening entirely.
- The posts are leaning or the concrete pad is cracked around them. In McKinney’s clay soil, posts move every wet-dry cycle, and once they start leaning, the gate’s geometry is shot. New hinges on leaning posts will not fix it. The fix is new posts set deeper, with proper concrete.
- The gate opens by hand because the opener is dead. If you’ve been pulling the gate open for six months because the motor quit, you already know what that costs you in time and security. A new gate with an integrated opener means you never touch it again unless you want to.
- You’re replacing the fence and the old gate does not match. A new board-on-board cedar fence with a rusted 20-year-old steel gate looks worse than no gate at all. We install new gates in the same visit as fence replacement so the whole line is clean.
- You want controlled access: keypad, intercom, or app control. Adding automation to a gate that was never built for it is usually more expensive than doing it right from the start. If you want to let the grandkids in from your phone or buzz a delivery truck through, a new gate built for automation is the answer.
Our Gate Installation Process - Step by Step
- 1
Free measure and site walk. We come to your property, measure the opening, check the grade, look at the existing posts (if any), and talk through what you want the gate to do. You get a written estimate before we leave, not a vague number floated over the phone.
- 2
Design and material selection. We show you material options with real numbers attached: steel gauge, post size, finish type, opener brand. You pick what fits your budget and your entry. We order or fabricate the gate and schedule your install date.
- 3
Post setting and concrete work. We dig and set posts in concrete, allowing proper cure time before hanging. For sliding gates, we pour the base and set the track at this stage. We inspect the soil conditions on site, because McKinney’s expansive clay demands deeper footings than the minimum.
- 4
Gate hanging, alignment, and automation. We hang the gate, set the hinges or roller trucks, square everything, and install the opener if you’re doing automation. Photo eyes are positioned and tested, force limits are set to the gate’s actual weight, and the gate cycles several times while we watch for binding.
- 5
Walkthrough and Done Right Promise. We walk the gate with you, show you how the manual release works, program your remotes and keypad, and answer whatever questions you have. Then we leave you with the written 90-Day Done Right Promise. If anything is not right, we come back and make it right. No forms, no arguing.
How Much Does Gate Installation Cost in McKinney?
A basic single swing driveway gate in McKinney, steel frame with wood or picket infill and no automation, generally runs $3,800 to $5,500. A double swing gate in ornamental iron starts around $6,000 and can reach $9,000 depending on width and design. Add a LiftMaster or FAAC opener and you’re looking at $900 to $2,200 more, including the motor, arms, photo eyes, and programming. A sliding gate across a wide driveway typically lands between $6,500 and $14,000 because of the concrete foundation work involved. Security gates with taller panels and access control run $8,000 and up.
What moves the price: gate width and weight, material (aluminum, steel, wrought-look iron, wood on steel frame), opener brand, access control (keypad vs. intercom vs. phone app), and whether we’re removing and hauling off the old gate and posts. The way to avoid overpaying is to get a written estimate that separates materials, labor, and any concrete or electrical work so you can see exactly what you’re paying for. Our estimates are free, and the price we quote is the price you pay before any work starts. Senior and veteran customers always get 5% off, and we’ll give you a free second opinion on any written estimate you’ve already received from another company.
Gate Installation Near McKinney - Our Service Area
Ironworks Gate Co. is based right here in McKinney, and we install gates throughout Collin County and the northern suburbs. Our service area covers McKinney, Prosper, Anna, Celina, Melissa, Princeton, Fairview, Allen, Murphy, Little Elm, Lucas, and Frisco. Most installs are scheduled within a week of the estimate, and since a live person answers the phone 24 hours a day, you’ll never wait until Monday to get a question answered. For a full look at what goes into a McKinney install specifically, see our Gate Installation in McKinney page.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in McKinney
Gate installation is the process of setting the posts, hanging the gate, and wiring any opener or access system so a driveway or walk-through gate is functional, level, and built to last. For McKinney properties, this also means accounting for clay soil movement, which affects how deep posts need to be set for any Emergency Gate Installation in McKinney, TX. Our installs include any needed concrete work, hinge and latch hardware, and automation programming, all covered by the 90-Day Done Right Promise.
Most residential gate installations in McKinney take one to two days on site. A straightforward single swing gate with no automation can often be done in a day, while a double gate with concrete work and an opener typically runs two days. Concrete curing time is built into the schedule, so we may set posts on day one and hang the gate on day two.
A typical gate installation in McKinney runs between $3,800 and $14,000, with most standard jobs falling in the $4,500 to $8,500 range. Material, gate size, opener brand, and access control are the biggest cost drivers. We quote every job in writing before any work starts, and the price never changes mid-job. Call (430) 226-4507 for a free measure and exact quote.
Yes, we install and program LiftMaster gate openers regularly, and our technicians carry the programming tools and common parts for them. We also install FAAC, BFT, Mighty Mule, and other major brands. Whatever opener you have or want, we can set it up correctly with the photo eyes, limits, and remotes working like they should.
If your gate is stuck open or you’ve had a security issue, call us anytime at (430) 226-4507 and a live person will answer. We can often get a technician out the same day to secure the opening and give you options. Installing a full new gate still takes scheduling, but we’ll make sure your property is not left unsecured in the meantime.
Every gate installation is covered by our written 90-Day Done Right Promise. If anything is not right within 90 days, we come back and make it right, no paperwork and no back-and-forth. Manufacturer warranties on openers and hardware apply separately, and we’ll show you exactly what’s covered before the job starts.
Clear the area around the gate opening of any vehicles, potted plants, or debris so we have room to work. If you have pets, keep them inside during the install. We’ll handle the rest: locating utilities before digging, hauling off the old gate and posts, and cleaning up the work area when we’re done.
Schedule Your Gate Installation Service in McKinney Today
Call (430) 226-4507 for a free measure and written estimate. A live person answers 24 hours a day, 7 days a week, and we’ll schedule your install at a time that works for you. You’ll get a square deal: an upfront price, no surprises on the bill, and a gate that’s done right and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving McKinney since 1984.