Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across McKinney
Gate installation in McKinney, TX runs roughly $1,800 to $8,500 for most homes, depending on whether you need a simple pedestrian gate, a double swing driveway gate, or full automation with new power and conduit. The right install starts with a site walk, a written price, and a plan for the Blackland Prairie clay under your posts. We work across McKinney every week, from Craig Ranch to Stonebridge Ranch to the historic streets near downtown. Call (430) 226-4507 and a live person answers, 24 hours a day, 7 days a week.
This page answers what McKinney homeowners actually ask us: how much a gate costs here, why posts lean in this soil, whether you can automate the manual gate your builder left you, and what HOA rules mean for material choices. It is written for the homeowner who wants the job done once, correctly, and guaranteed in writing.
Why Ironworks Gate Co. Is McKinney’s Preferred Gate Installation Company
We have been building and automating gates for over 42 years, and our technicians know McKinney’s neighborhoods the way a local should. The master-planned communities here, Stonebridge Ranch, Craig Ranch, Trinity Falls, and the newer developments pushing east toward Princeton, all went up fast between roughly 2000 and 2015. That building surge left behind a very specific pattern: gorgeous ornamental iron and cedar gates installed to HOA spec, often with builder-grade operators underneath and no dedicated power run to the gate. We see the same failure points across hundreds of McKinney properties, and we fix them correctly the first time.
Victor Salinas leads our team, and the standard he sets has not changed in four decades: Krafted right, Every time, Your home first, Standing behind it. Our technicians are background-checked and uniformed, and they treat your driveway the way they would treat their own mother’s. Every job ends with the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork hassle, no arguing.
This is also why we are the company McKinney homeowners call after a generalist handyman has already failed. We are trained and equipped on nine automation brands, including LiftMaster, FAAC, and BFT, so when you call about a gate that will not open or a post that has pulled out of plumb, the technician who shows up knows exactly what he is looking at. Our Gate Installation team handles the full scope: footings, steel fabrication, hinge work, operator mounting, power runs, keypads, and final HOA-compliant finish.
Our Gate Installation Services in McKinney
Driveway Gate
McKinney’s newer subdivisions are dense with ornamental iron and steel driveway gates, most of them double gates spanning 12 to 16 feet. A new driveway gate here is not just a gate. It is a footing decision, an operator choice, a safety photocell placement, and often an HOA design review. We install driveway gates that handle McKinney’s spring storms and summer clay movement without sagging out of the latch in two years.
Pedestrian Gate
Pedestrian gates in McKinney are often the forgotten gate, the side entry that has been swinging on the same rusted hinges for fifteen years. We build and install cedar pedestrian gates that match the existing board-on-board fence lines common in Stonebridge Ranch and Craig Ranch, and we set the post in concrete at a depth that will not heave with the clay.
Sliding Gate
Sliding driveway gates make sense on McKinney lots where the driveway slopes up from the street or where a swing gate would arc into the front yard planting beds. We install rack and pinion slide gates with proper roller assemblies and a concrete track bed, and we always account for drainage so the gate does not sit in standing water after a North Texas downpour.
Swing Gate
Swing gates remain the most common choice in McKinney, especially dual swing gates at street entry. The challenge here is always the post. Blackland Prairie clay expands and contracts dramatically, and a post set shallow will lean within two seasons. We auger post holes to depth, set in concrete, and when the job calls for automation, we mount the operator and run the conduit so the hinge line stays true year after year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McKinney
We install and service automation from Mighty Mule, LiftMaster, FAAC, and BFT, among others. That matters in McKinney because HOA communities here have mixed brands across the neighborhood depending on what the original developer’s contractor purchased. A homeowner in Trinity Falls might have a LiftMaster at the pedestrian gate and a FAAC at the driveway. A homeowner in Craig Ranch might have a builder-grade Mighty Mule that cycles twenty times a day. One technician who knows all of these brands solves the problem on the first visit. We keep common parts stocked for the operators most often found in McKinney, which means most repair and replacement work does not wait on a backorder.
Common Gate Installation Problems We See in McKinney Homes
- Posts leaning out of plumb. The underlying clay soil in McKinney heaves after spring rain and contracts during summer drought. The soil movement pushes shallow-set posts sideways, pulling the hinge line apart and making the gate drag or sit off the latch. This is the single most common call we get from McKinney homeowners between June and September.
- Builder-grade operators failing early. Many McKinney homes built in the 2000s and 2010s got the cheapest operator the builder could source. Combined with frequent daily cycling in a busy household, the plastic gearing strips within a few years. We replace these with commercial-duty operators sized for the gate’s actual weight and cycle frequency.
- No power or conduit at the gate location. A significant number of McKinney gates were installed manual during original construction, with no electrical line run to the gate post. Automating those gates later means trenching power from the panel or the house, and doing it without cutting through irrigation lines. We handle the full power run, low-voltage wiring, and safety sensor placement.
- HOA mismatch on materials. McKinney’s largest communities have architectural guidelines that specify exact gate styles, picket spacing, colors, and hardware. We have seen homeowners replace a single damaged picket with something close but not exact and then receive a violation letter. Before we source any replacement part or install a new gate, we cross-check the community’s published standards so you do not have to.
Pricing for Gate Installation in McKinney, TX
A clear breakdown helps McKinney homeowners plan. A standard single swing driveway gate, steel or ornamental iron, no automation, typically runs $1,800 to $3,800 installed. A double swing driveway gate starts around $3,500 and goes to $6,500 depending on width, material, and finish. Pedestrian gates run $700 to $1,800. Adding automation with an operator, safety photocells, and a power run adds $1,200 to $3,200 depending on the distance from the panel and the brand selected. A full sliding gate with track, roller assembly, operator, and power usually lands between $5,500 and $8,500.
What moves the price in McKinney specifically: HOA-compliant ornamental patterns cost more than standard tube steel; trenching power across a wide driveway adds labor; and remediating a leaning post with a proper concrete footing adds material and time. Every quote is written, itemized, and agreed before any work starts. Call (430) 226-4507 for a free estimate at your McKinney home, and we will put numbers on paper the same visit.
We Also Serve Cities Near McKinney
Ironworks Gate Co. serves all of McKinney and the surrounding North Texas communities. Homeowners in Melissa, Allen, Princeton, and Anna call us for the same dedicated gate work, and our scheduling covers these areas weekly. If you live outside McKinney but nearby, see our McKinney service area page or call (430) 226-4507 and we will confirm our next available visit.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in McKinney
Most master-planned HOAs in McKinney do require architectural review of any new gate, operator, or material change, and many of the larger communities including Stonebridge Ranch and Craig Ranch have deed restrictions that specify exact design standards. We cross-reference your community’s published guidelines before ordering parts or drilling the first hole, so you never end up with a violation letter after the job is done. Call (430) 226-4507 and we will help you navigate the approval process.
The Blackland Prairie clay under McKinney expands significantly after spring rains and shrinks hard during summer droughts, and that seasonal movement pushes shallow posts sideways over time, no matter how many times you straighten the gate panel itself. The repair that lasts is the one that addresses the footing: augering deep enough to get below the active clay movement zone and setting the post in a concrete pier. Our crew does this on almost every gate repair in McKinney’s newer subdivisions. Call (430) 226-4507 for an inspection of your post and footing.
Yes, and we do this frequently in Trinity Falls and across McKinney, because many builders installed attractive gates without any automation or power. The work involves sizing the operator to the gate’s actual weight and width, running a dedicated power and low-voltage line from the panel to the gate post, and installing safety photocells and a keypad. We quote the full job upfront, trenching included, before any work begins. Call (430) 226-4507 for a free site walk and written estimate.
A swing gate on properly engineered post footings, augered below the active clay movement zone and set in concrete, performs best on McKinney’s Blackland Prairie soil because the hinge line stays stable even as the surrounding soil swells and shrinks. Sliding gates also work well because they ride on a track rather than hanging from posts, but the track bed needs proper drainage and frost-depth consideration. We will recommend the right option after looking at your specific lot, driveway slope, and HOA requirements.
Spring storm fronts and hail can bend lightweight gate frames, knock operators off level, and strip hinges if the gate is built from thin-gauge steel or hardware that was never rated for wind load. McKinney gets its share of high-wind events each spring, and a newly installed gate should be built with wind bracing appropriate for a North Texas driveway. We install to storm-ready standards, and our 90-Day Done Right Promise covers the gate settling correctly after its first spring storm season. Call (430) 226-4507 with any questions about a recently installed gate, we would rather hear from you now than after the next storm.
Contact Ironworks Gate Co. for Gate Installation in McKinney
You want a gate that stays square, latches every time, and complies with your HOA, without surprises on the invoice. That is the only kind of gate installation we do. Victor Salinas and the Ironworks team have been doing this work for over 42 years, and we put the 90-Day Done Right Promise in writing on every single job. The price is quoted and agreed before a single bolt is turned. Call (430) 226-4507 now for a free estimate, and we will walk your McKinney property, take the measurements, and hand you a written number on the spot.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving McKinney and North Texas.