Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plano
Gate installation in Plano usually runs $1,800 to $6,500 depending on the gate type, material, and whether you’re adding automation. We’re Ironworks Gate Co., and our crews work Plano’s 75023, 75024, and 75025 ZIP codes every week, so we know what this city’s soil, HOA rules, and older housing stock demand from a gate job. Call (430) 226-4507 and a live person answers, any hour of any day, to schedule a free on-site estimate.
Why Ironworks Gate Co. Is Plano’s Preferred Gate Installation Company
We’ve been on the right side of Plano gate jobs for a long time, and homeowners here tell us the same things: they want the gate square, the hinge posts deep enough for this clay, and a price that does not move after we start. Our Gate Installation team works on driveway gates, pedestrian gates, and full automation setups, and we handle the HOA paperwork question before you have to ask.
Plano’s older neighborhoods, especially the ones built out between the late 1970s and early 2000s, have thousands of cedar gates reaching the end of their service life at the same time. We see the same failure patterns over and over, and that repetition means we can usually tell you what a gate needs within ten minutes of looking at it. Victor Salinas leads the company, and he’s built the team around a simple rule: do the job like you’re working on your own mother’s house.
Every completed job carries our 90-Day Done Right Promise in writing. If something is not right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard on every gate we hang in Plano.
Our Gate Installation Services in Plano
Most Plano lots have either a side pedestrian gate, a double swing driveway gate, or a single sliding gate. Here’s what each looks like in practice, with Plano-specific conditions called out where they matter.
Driveway Gate Installation
Driveway gates in Plano run the full range: simple wrought-style single swing gates on newer 75024 properties, heavy double gates on larger lots in Preston Hollow-adjacent neighborhoods, and sliding gates where a swing would eat too much driveway. We measure your setback, check the slope from the street to the garage, and recommend a gate that clears a full-size pickup without the leading edge scraping on approach. Most driveway gate installs in Plano run $2,800 to $6,500 depending on material and automation.
Pedestrian Gate Installation
Side-yard pedestrian gates are the quiet workhorses of Plano’s older subdivisions. In 75023 and 75025, these are often cedar boards on a frame that’s now 30 years old, with hinges pulling and posts leaning from clay movement. We replace or install pedestrian gates from $900 to $2,200, including new pressure-treated or steel-reinforced posts set deep enough to stay put. A well-set pedestrian gate should close square for a decade or more, even through Plano’s wet-dry clay cycles.
Sliding Gate Installation
Sliding gates are the right call on many Plano lots where a swing gate would block the sidewalk or clip a parked car. The catch is that Plano’s expansive black clay shifts slide tracks and throws the rack-and-pinion alignment out of true if the gate base is not set below the active clay zone. Our sliding gate installs in Plano typically run $3,200 to $6,500, and we always check rack alignment against the concrete’s movement history on your specific lot before we call it done.
Swing Gate Installation
Single and double swing gates remain the most common style in Plano, especially on properties built in the 1980s and 1990s. A properly hung swing gate on this soil needs hinge posts set at least 24 to 30 inches past grade with flared footings, because anything shallower gets lifted by the clay in the first wet winter. We install swing gates in Plano from $1,800 to $4,500, with double gates on the higher end due to the additional hardware and alignment work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
When a Plano customer wants an automatic gate opener, we’re trained and equipped on the brands already installed across this city: LiftMaster, FAAC, BFT, Mighty Mule, and several others. We carry common parts and remotes for these brands in our service vehicles, which means we are not running back and forth to a supplier while your driveway sits unusable. If you already have an opener and just need the gate itself replaced, we’ll work with what’s there or recommend a direct replacement that fits the existing posts and wiring.
Common Gate Installation Problems We See in Plano Homes
- Posts set too shallow in black clay. Contractors unfamiliar with Plano’s soil set posts in concrete to 18 inches, and the clay lifts the entire footing during the first wet-dry cycle. The gate binds against the latch within a season. We drill 24 to 30 inches and flare the base, a depth this soil practically demands.
- Swing gates on tight setbacks. On narrower Plano lots, a swing gate that looks fine on paper scrapes the concrete or clips a fender the first time a full-size truck pulls in. We check approach angles and driveway width before recommending a swing versus a slide.
- Slide gates with rack misalignment. Clay movement shifts slide gates off their track, and the loop detector stops opening for the owner’s car. We verify rack-and-pinion alignment against the specific movement history of your property before final sign-off.
- HOA compliance stalls. Plano has an unusually dense HOA network, especially in 75025 master-planned communities. If you replace a gate without architectural review approval, you may be ordered to tear it out. We provide spec sheets, material samples, and a written description of the work for your committee to review before we dig.
Pricing for Gate Installation in Plano, TX
Here’s what Plano homeowners can expect to pay for common gate installation work in our market. These numbers are for fully installed gates including new hardware, and automation pricing is additional. We always quote the price in writing before any work begins, and we do not start until you’ve approved that number.
| Gate Type | Typical Plano Range | Notes |
|---|---|---|
| Pedestrian cedar gate | $900-$2,200 | Includes new posts set to 24″+ depth |
| Single swing driveway gate | $1,800-$4,500 | Steel or cedar, manual or automated |
| Double swing driveway gate | $3,000-$6,500 | Two gate leaves plus center alignment |
| Sliding driveway gate | $3,200-$6,500 | Track, rack, and pinion included |
| Opener/automation add-on | $800-$2,000 | Brand and safety features affect price |
Call (430) 226-4507 for an exact quote. Estimates are free, and we’ll walk your property with you so you understand exactly what you’re paying for before any work starts.
We Also Serve Cities Near Plano
Our Gate Installation in Plano service area extends into the neighboring communities of Allen, Frisco, McKinney, and Prosper. If you’re on the edge of Plano near the Allen border or out toward Frisco’s 75034 side, call us anyway. We’ll tell you straight whether we can get a crew to you this week, and we make the drive up US-75 or the Dallas North Tollway without blinking.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plano
In Plano’s expansive black clay, hinge and latch posts need to be set at least 24 to 30 inches past grade with a flared footing base. Anything shallower gets lifted by the clay during the first wet-dry cycle, and the gate binds or sags within a season. We drill to 30 inches on most replacement gates and flare the bottom of the hole so the footing keys into the subsoil. Call (430) 226-4507 and we’ll check your existing posts and tell you whether a reset will hold or if you need full replacement.
If the gate frame is still square and the boards aren’t rotted, the leaning is usually from a hinge post that has shifted in the clay. Straightening the gate panel alone won’t fix it. The post has to come out, the hole drilled deeper, and a new post set to at least 24 to 30 inches with a flared base. We’ll diagnose the exact cause on-site and show you what’s moving before we recommend a repair versus a replacement. Estimates are free at (430) 226-4507.
Yes. Sliding gates are the correct solution on Plano lots where a swing gate would extend over the sidewalk or collide with parked cars on approach. The key is setting the track base and rack-and-pinion alignment to account for Plano’s clay movement, because a slide gate that’s off its track won’t open for the loop detector. We install sliding gates in Plano regularly and quote the full job including track, rack, motor, and safety edges before any work starts. Call (430) 226-4507 to schedule a measure.
We provide the spec sheet, material samples or photos, gate dimensions, and a written description of the work for your architectural review committee. In Plano’s 75025 ZIP code especially, HOA approval is a standard part of the job, and we’ve been through the process enough times to know what most committees ask for. We’ll also confirm the final gate design matches the approved submittal so you’re not in violation after the fact. Call (430) 226-4507 and we’ll help you get the paperwork moving.
Yes. Automatic driveway gates must have entrapment protection, typically a photocell or safety edge, to stop and reverse if something crosses the gate path. We install photocells, safety edges, and other required features on every automated gate we build in Plano, and we test the reversing function before we leave. If you’re replacing an older opener, we’ll make sure the new system meets current safety standards. Call (430) 226-4507 for specifics on your gate.
A Note on Plano’s Soil, HOAs, and Older Gates
Here’s the Plano-specific situation in plain terms. The city’s 1980s and 1990s building boom put up tens of thousands of cedar privacy gates across 75023 and 75025. Those gates are now 25 to 40 years old, which means they’re reaching failure age at roughly the same time. The North Texas black clay under Plano does not help: it swells when wet and shrinks when dry, and it heaves gate posts out of plumb with quiet regularity. The workaround our crews use, and what out-of-area installers often skip, is drilling post holes to at least 24 to 30 inches past grade and flaring the footing base. Concrete-only sets at 18 inches fail on repeat calls because the clay lifts the whole plug.
Layered on top of that is Plano’s unusually dense HOA network. In much of the city, especially in western 75024 and north 75025 communities, replacing a backyard or side gate requires architectural review committee approval before the first post hole is dug. We provide what committees ask for: spec sheets, material samples, dimensions, and a written work description. If the committee wants changes, we adjust. That’s normal to us, and it keeps your replacement from being ordered torn out later.
Last spring our crew replaced a double swing gate on a shared driveway in the Dallas North Estates area of 75025. The original 1990s cedar posts had heaved so badly the latch wouldn’t catch, and two families used that driveway every morning. We drilled both hinge posts 30 inches deep and flared the footings, then hung new steel-reinforced cedar panels with a Ghost Controls solar gate opener and a keypad entry. The driveway stayed usable for both households while the HOA’s architectural committee signed off mid-job. That’s the kind of job Plano hands us regularly.
If your gate is leaning, sagging, or past its service life, call (430) 226-4507. We’ll come out, look at what you’ve got, tell you what it needs, and hand you a written price before any work starts. Done right and backed in writing, the way a Plano gate should be.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Plano and the Dallas-Fort Worth area since 1984.