Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Plano
Gate access control in Plano means keypads, remotes, video intercoms, and phone entry systems that work every time you pull up to your driveway. A typical keypad or remote system replacement in Plano runs $340-$680, while full smart access systems with video intercom range from $1,200 to $3,800. We install and repair all of it, and we service the brands Plano homes actually have: LiftMaster, FAAC, BFT, and Mighty Mule. Call (430) 226-4507 and you’ll reach a live person, any hour, any day.
Victor Salinas has been leading our gate crews through Plano’s neighborhoods long enough to know which streets have the worst clay movement and which HOAs want keypads mounted a specific way. We do not make you describe your problem to a call center. You get a background-checked, uniformed technician who knows Plano’s gates, Plano’s soil, and Plano’s HOA process.
Why Ironworks Gate Co. Is Plano’s Preferred Gate Access Control Company
We have been in the gate business since 1984, and Plano homeowners call us for one reason more than any other: we fix the problem the first time. Our technicians are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule, so the part on your driveway is a part we already know. Most access control jobs in Plano are completed in a single visit. The price is settled before a single bolt is turned, and you get it in writing.
Every job is backed by our 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard, and it applies to every keypad, motor, intercom, and reader we touch in Plano.
There is also this: a live person answers our phone 24 hours a day, 7 days a week. When your gate keypad dies at 10 p.m. and you cannot get into your own driveway, you do not wait for a callback. You talk to us, and we get a Plano crew on it.
Our Gate Access Control Services in Plano
We handle the full range of access control for Plano driveways and estate gates, from simple keypad replacements to full smart access retrofit on older cedar gates that were never wired for automation. Here is what Plano homeowners ask for most.
Keypad Entry
A dead keypad is the most common access control failure we see in Plano, especially in 75023 and 75025 where original builder-grade units are finally giving out. We replace keypads with weather-sealed units built for North Texas summers and ice storms. In Plano, keypad replacement typically runs $280-$450 installed, including reprogramming.
Smart Access
Smart access means opening and monitoring your gate from your phone, anywhere. For Plano’s older neighborhoods, this usually means retrofitting a Wi-Fi or cellular controller onto an existing operator. Most smart access upgrades in Plano run $450-$1,500 depending on whether you need a new control board, a wireless bridge, or both. We wire it correctly and test it before we leave.
Video Intercom
Plano’s western half, especially 75024, has a large share of ornamental iron driveway gates where a video intercom makes sense. You can see and speak to whoever is at the gate before opening it. Video intercom installations in Plano typically start around $1,200 and can go to $2,800 with a full camera, monitor, and remote release system. We handle the power run, the mounting, and the programming.
Phone Entry
Phone entry systems let visitors call a number from the gate keypad, and you buzz them in from your phone. These are common in Plano’s estate-lot communities and gated enclaves. A phone entry unit installed in Plano runs $600-$1,400, and we configure it to your carrier and your gate operator on the same visit.
We also service card readers and remote controls. If your gate uses a clicker that stopped working or a card reader that stopped reading, call us. Most remote control and card reader repairs in Plano are done the same day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
We are factory-trained on the systems Plano homes actually run. LiftMaster operators are everywhere in Plano’s 1990s and 2000s subdivisions. FAAC and BFT show up heavily on the ornamental iron gates in the 75024 corridor. Mighty Mule is the brand we see most on retrofitted cedar gates in 75023 and 75025. Because we stock parts for all of them locally, most Plano access control repairs are single-visit jobs. We do not leave your gate on manual mode while we order a part from a warehouse in another state.
Common Gate Access Control Problems We See in Plano Homes
- Builder-grade operators that quit under real load. Plano’s 1980s and 1990s building boom put light-duty operators on gates that were never expected to last 30 years. When the gate starts dragging on clay-heaved posts, the motor burns out. Replacing the operator without fixing the post is a repeat call.
- Manual cedar gates with no wiring run. Tens of thousands of Plano homes in 75023 and 75025 were built with cedar privacy gates and no power run. Automating those gates means trenching through expansive clay, and if the conduit is not buried deep enough, the next wet-dry cycle cracks it.
- HOA compliance issues. Plano has one of the densest HOA networks in North Texas. Some architectural committees require specific keypad placements, operator styles, or even paint colors on mounted boxes. Installing first and asking later means rework, and you eat the cost.
- Clay movement knocking sensors out of alignment. Safety photocells and loop detectors shift when the posts shift. If your gate reverses for no reason or will not close, the first thing we check in Plano is whether the posts have moved out of plumb.
Pricing for Gate Access Control in Plano, TX
| Service | Typical Plano Range |
|---|---|
| Keypad replacement | $280-$450 |
| Remote control replacement/reprogram | $120-$250 |
| Phone entry system installation | $600-$1,400 |
| Smart access upgrade | $450-$1,500 |
| Video intercom installation | $1,200-$2,800 |
| Full gate access control retrofit (cedar gate) | $1,800-$4,200 |
These are real ranges for Plano work, quoted before we start. What moves the number: whether conduit is already in place, the operator brand you have, and whether your HOA requires specific equipment. You get the exact price in writing before any work begins. We also offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
One thing you should know about Plano specifically: the black clay here heaves so aggressively that gate posts set in concrete-only footings fail on repeat calls. Local pros drill at least 24 inches past grade and flare the base. A lot of out-of-area crews skip that, and the gate fails again in a year. We do not skip it.
We Also Serve Cities Near Plano
Our Gate Access Control team works throughout Collin County. So when your Plano neighbor in Allen or Frisco asks who to call, tell them we cover those too. We also serve McKinney and Prosper, including their newer master-planned communities. This Plano page covers our home turf, but the same crew and the same Done Right Promise apply in every nearby city.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Plano
Yes, in most of Plano’s HOA-managed neighborhoods you need architectural review approval before adding visible access control hardware like a keypad, mounted box, or new operator arm. Plano’s HOA density is among the highest in Texas, and some committees have specific placement and style requirements. We can help with the paperwork and often include HOA-compliant mounting in our standard quote. Call (430) 226-4507 and ask us about your particular HOA, we have probably worked with it before.
Your gate post has almost certainly shifted out of plumb from clay expansion. North Texas black clay absorbs water and swells, pushing the post and the concrete plug around it upward or sideways. The fix is re-setting the post on a flared footing drilled at least 24 inches deep. That is the only repair that survives the next wet season.
Yes, and we do it regularly throughout 75023 and 75025. The biggest factor is the power run. Most of those cedar gates were never pre-wired, so we trench conduit through the yard and bury it deep enough to survive clay movement. A full retrofit including operator, keypad, remote, and power run in Plano typically runs $1,800-$4,200. We quote it exactly before starting.
We service LiftMaster, FAAC, BFT, Mighty Mule, and five other major brands. On Plano’s ornamental iron gates, FAAC and BFT are the ones we see most often, especially in the 75024 corridor and communities like Willow Bend. We stock parts locally for all of them, so most repairs happen in one visit.
At least 24 inches past grade, with a flared base. The clay in Plano heaves the entire concrete plug if the footing is too shallow. We drill 30 inches or more on heavier gates, and we flare the bottom so the uplift pressure cannot pull the post out. Anything less is a temporary fix.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Plano and Collin County with gate access control since 1984.