Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Parker
Gate installation in Parker runs between $4,800 and $28,000 for a typical custom estate project, with most automatic driveway gates landing in the $7,500 to $15,000 range depending on material, length, and operator class. We quote every job up front, in writing, before a single bolt is turned. Parker isn’t a tract-home market. It’s custom estates on acre-plus lots, and nearly every one of them has or needs an automatic gate. Call (430) 226-4507 and we’ll schedule a free measure and walk you through what the job actually requires.
Our crews know the roads out here: Parker Road, McCreary, Ballard, the stretches east of Country Club and north toward the Southfork Ranch country. We dispatch from our Dallas-Fort Worth office and are on Parker driveways regularly. When you call, a live person answers. Not a voicemail tree.
Why Ironworks Gate Co. Is Parker’s Preferred Gate Installation Company
We’ve been building, hanging, and automating gates for over 42 years, since 1984. Most of that work in recent decades has been in Collin County estate communities like Parker, where the demand isn’t for basic chain-link or farm pipe. It’s for ornamental iron, custom swing geometry, slide gates that clear long driveway spans, and operators sized to move serious weight without straining.
Victor Salinas leads our installation crews. He’s the one who walks every Parker job before we quote it, checks post footings and soil conditions, and tells you straight what will hold and what won’t. That matters out here. The Blackland Prairie clay under Parker moves more than most people realize, and a gate installed without accounting for it will be back out of plumb within two seasons.
Every completed job carries our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing. That promise is why Parker homeowners who’ve been burned by one-truck operators tend to call us first and stay with us after.
Our Gate Installation Services in Parker
We specialize exclusively in driveway and estate gates. That’s the whole business. Hinges, welds, posts, operators, keypads, loop detectors, photocells. We’re not a general contractor dabbling in gates. Gate Installation is what we do, every day, in Parker and across the metro.
Driveway Gate
Parker’s zoning mandates 1-acre-plus minimum lot sizes, so the typical driveway here stretches 60 to 200 feet from the road to the house. That’s not a suburban 20-foot run. A driveway gate in Parker needs a post footing deep enough to anchor the span, and an operator rated for the actual weight. We size both correctly the first time.
Pedestrian Gate
On a Parker estate, a separate pedestrian gate next to the driveway gate is often the smarter move than opening a 16-foot automated leaf every time someone walks out for mail or a run. We build pedestrian gates to match the driveway gate’s style and set them with their own latch and lock hardware, keyed or integrated into your access system.
Sliding Gate
For Parker properties with sloped driveways or short setbacks from the road, a slide gate often beats a swing gate. It doesn’t need room to arc across the drive, which matters when the county road is close or the driveway curves. We install rack-and-pinion slide operators and set the rail so the gate moves cleanly through Parker’s wet-dry soil cycles without binding.
Swing Gate
Ornamental iron double swing gates are the signature look on Parker estates, and they demand the most careful shop work. Hinge post plumb, leaf weight distribution, operator arm geometry. We fabricate and hang swing gates that close with one finger and stay true. On a custom double swing in Parker recently, we set a new 4-foot-deep concrete footing with a rebar cage, trued both hinge posts with a laser, and paired a LiftMaster operator with underground loop detectors and a DoorKing keypad. That gate swings silently now, and it’ll reset its travel limits accurately through the next dry-wet cycle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parker
We’re certified and trained on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule. That coverage matters on Parker estates, because custom installations over the past 25 years used whatever operator the original builder or gate company specified. We stock common parts for these systems and can have most replacement components in hand the same day. You don’t wait a week for a capacitor or a limit switch because your operator brand is out of production.
Common Gate Installation Problems We See in Parker Homes
- Posts out of plumb from clay movement. The Blackland Prairie soil under Collin County shrinks in summer drought and swells when fall rains return. That movement pushes posts and throws even well-installed gates out of alignment.
- Travel-limit drift on slide operators. Rack-and-pinion systems lose calibration when the post footings heave. The operator thinks the gate is in a different position than it is, so it stops short or overruns.
- Sagging ornamental swing gates. Original footings on some Parker homes were undersized for the gate’s weight. Ten or fifteen years of clay cycles later, the hinge post leans and the gate drags.
- False reverse trips on security gates. Photocells get misaligned when posts tilt during drought, and the gate reverses for no visible reason. Homeowners often blame the operator when the real problem is two inches of post drift.
Pricing for Gate Installation in Parker, TX
| Gate Type | Typical Installed Price in Parker |
|---|---|
| Single ornamental iron swing gate, manual | $2,800 - $5,500 |
| Single automatic swing gate with operator | $5,500 - $9,000 |
| Double automatic swing gate, custom ornamental | $9,000 - $18,000 |
| Automatic slide gate, rack-and-pinion | $7,500 - $16,000 |
| Full estate entry: gate, operator, keypad, loop detectors | $12,000 - $28,000 |
These are real ranges for Parker’s market. Material choice drives most of it: welded ornamental steel costs more than aluminum, custom fabrication costs more than a standard panel, and an operator rated for a 1,200-pound custom iron gate costs more than one sized for a 400-pound aluminum leaf. We also handle the power run, safety edges, and access wiring, and those are priced on the written quote, agreed before we start. Estimates are free. Call (430) 226-4507 for a measured quote on your specific driveway.
We Also Serve Cities Near Parker
If you’re in McKinney, Prosper, Anna, or Celina, we work those communities regularly and can usually schedule within a few days. This page covers Gate Installation in Parker specifically, but the same crews, the same brands, and the same written promise apply anywhere in the Collin County corridor.
Serving Parker, TX - Our Local Coverage Area
We’re based in the Parker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Parker
Parker sits on Blackland Prairie expansive clay that shrinks during summer drought, then swells rapidly when fall rains return. The swelling lifts and tilts the post footings just enough to drag the gate against the drive or trip the safety-reverse. Our first move on these calls is checking post plumb, not the operator board. A quick quote: call (430) 226-4507 and we’ll tell you if it’s a leveling fix or a full post reset.
Usually not. Custom ornamental iron gates on Parker estates often weigh 700 to 1,200 pounds per leaf, and a standard residential operator rated for 500 pounds will burn out within a season or two. We size the operator to the actual gate weight and duty cycle. If you’re replacing a gate and wondering whether your existing operator can stay, call (430) 226-4507 and we’ll check it during the free estimate.
On a Parker estate, yes, in our view. Opening a full automated driveway gate every time someone walks out for mail or a jog adds unnecessary cycles to the operator and shortens its life. A matched pedestrian gate with its own keyed latch is a one-time cost that saves you operator repairs later. We include it in most Parker quotes unless the driveway layout makes it impractical.
Sometimes, but in Parker we check the footings first. If the existing posts are set in clay and have already drifted even slightly, reusing them means putting a new slide gate on a foundation that’s already moving. If the footings are deep and true, we can often reuse them. If they’re shallow or out of plumb, we’ll recommend a new footing with the proper depth and rebar. The decision is made on site before we quote, and you’ll see it in writing.
Most often it’s a misaligned safety photocell, caused by post tilt or soil movement knocking the beam out of line. The operator reads the broken beam as an obstruction and reverses. It could also be a failing edge sensor on a security gate. We diagnose the actual cause before touching the operator wiring. Call (430) 226-4507 and we’ll get it sorted, usually in one visit.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Parker and the Collin County area for over 42 years.