Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Allen
A new driveway gate in Allen typically runs $4,800-$14,500 installed, with sliding gates on the higher end and ornamental swing gates in the middle of that range. Most installations take two to four working days from footing pour to final operator programming. Ironworks Gate Co. has installed and serviced gates in Allen long enough to know that the clay under your driveway and the HOA binder on your kitchen counter matter just as much as the steel we hang. Call (430) 226-4507 for a free on-site measure and a written price before any work begins.
Why Ironworks Gate Co. Is Allen’s Preferred Gate Installation Company
Allen homeowners tend to keep their properties for decades, and they have seen enough contractor turnover to ask hard questions. We answer them plainly. Our crews work in Allen weekly, from the tree-lined sections of the 75002 ZIP near Allen High School to the master-planned communities spreading across the 75013 ZIP. We know which subdivisions require specific powder-coat colors and which ones enforce picket-profile standards down to the quarter inch.
Every installation gets the same written guarantee: the 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing. That promise has carried weight in Allen because residents talk to their neighbors, and a gate that sags two seasons in is a conversation starter for the wrong reasons.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands. When your HOA asks who did the work and whether it meets the community’s architectural standards, you’ll have a company name behind it, not a pickup truck and a handshake.
Our Gate Installation Services in Allen
Driveway Gate Installation
A new driveway gate in Allen starts with the soil, not the steel. Blackland Prairie clay expands and contracts enough to tilt a shallow footing out of plumb within two seasons. We pour deeper than code minimums, set posts on compacted gravel and concrete, and square the frame before the concrete cures. Most Allen driveway gates we install are ornamental iron or aluminum, sized for two-car and three-car entries, with automation added at the same time so you never have to retrofit a motor later.
Pedestrian Gate Installation
Pedestrian gates in Allen are often paired with a driveway gate but get used ten times more often. The hardware takes the abuse, and the latch is usually the first thing to fail. We hang pedestrian gates with adjustable hinges and commercial-grade latches, and we match the picket profile and powder-coat color to your existing driveway gate so the HOA’s architectural committee signs off the first time. If you are adding a pedestrian gate where one did not exist, we’ll pull the community’s standards sheet before we order a single panel.
Sliding Gate Installation
Sliding gates are the right answer for many Allen driveways, especially on corner lots or where a swing gate would clip a neighbor’s fence line. The key to a slide gate that lasts on Allen clay is the rack-and-pinion geometry. If the rack is set level to the gate instead of the driveway’s grade, the operator binds and strips gears during the first wet spring. We set the rack to match the actual slope, not the theoretical one, and we test the travel with the motor installed, not just on paper. Expect a sliding gate installation in Allen to run $6,800-$14,500 depending on length, material, and operator choice.
Swing Gate Installation
A swing gate in Allen needs footings that resist heave and hinges that hold their alignment through summer-to-spring soil movement. We use adjustable steel hinges on welded posts, and we set the post depth based on the gate’s weight and the soil in your specific yard, not a generic table. For double driveways, we hang both leaves with matched geometry so they meet square in the middle, then program the operator to open both leaves in sequence. Swing gate installations in Allen typically run $4,800-$9,200 with automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allen
Allen’s housing boom from the mid-1990s through the early 2010s left a lot of gates on the ground, and the brands vary by subdivision and builder. We install and service LiftMaster, FAAC, BFT, and Mighty Mule among others, which means we can match whatever is already on the property or recommend the right operator for a new install. Most common parts for these brands are stocked on our trucks, so an Allen service call usually ends the same day it starts. When you call (430) 226-4507, a live person answers, day or night.
Common Gate Installation Problems We See in Allen Homes
- Heaving post footings. Allen sits on Blackland Prairie clay that swells in wet springs and shrinks in dry summers. Shallow footings tilt out of plumb within a couple of seasons, throwing a new swing gate out of square. We pour deeper and wider than minimum code.
- Slide gates bound on grade changes. A rack-and-pinion set level to the gate instead of the driveway’s actual slope will bind and strip gears. This shows up most after a wet spring when the driveway has moved a half inch. We set the rack to the real grade.
- HOA architectural mismatches. In Allen’s master-planned communities, a gate that is structurally fine but visually off-spec can be ordered torn out and redone by the HOA. We pull the community’s standards sheet before ordering replacement panels or powder coat.
- Missing entrapment protection. New automatic gates in Allen must meet UL 325 entrapment protection requirements. Skipping a safety photocell or edge sensor gets flagged at the HOA’s next walkthrough and must be retrofitted before the gate is approved. We install compliant protection on every automatic gate.
Pricing for Gate Installation in Allen, TX
Here is what we see in Allen’s market, based on the sub-service:
- Pedestrian gate, basic ornamental steel: $1,600-$2,800
- Swing gate, single driveway, with automation: $4,800-$9,200
- Sliding gate, single driveway, with automation: $6,800-$14,500
- Double swing gate, full driveway, with automation: $8,500-$16,000
What moves the number: gate material (aluminum vs. wrought iron vs. steel), gate length, operator brand, whether we are running new conduit for power and access control, and whether the existing posts can be reused. Your price is quoted and agreed before any work starts. No surprises on the bill. Call (430) 226-4507 for a free measure and written estimate, and ask about our standing offers: $50 off any repair over $250 and a 5% senior and veteran discount.
We Also Serve Cities Near Allen
Our crews work throughout Collin County, and we serve Plano, McKinney, Wylie, and Princeton with the same response times and written guarantees as Allen. If you are in a neighboring city and need a Gate Installation quote, call the same number and ask for Victor Salinas’ team.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Allen
Allen’s Blackland Prairie clay expands in wet springs and shrinks in dry summers, which can tilt shallow post footings out of plumb within two seasons. We pour footings deeper than code minimum, set posts on compacted gravel and concrete, and square the frame before the concrete cures. This is standard practice on every swing gate we install in Allen. Call (430) 226-4507 for a free on-site assessment of your soil and driveway grade.
Yes, many Allen HOAs enforce specific powder-coat colors, picket profiles, and sometimes operator brands for driveway gates. In the 75013 ZIP especially, the architectural standards are detailed and enforced. We pull the community’s standards sheet before ordering any materials, so the gate passes the board’s walkthrough the first time. Call us and we will check your community’s requirements.
Yes, sliding gates are often the only workable option on shared driveways or corner lots where a swing gate has no room to arc. We handle rights-of-way and shared-access situations regularly in Allen. In the Twin Creeks subdivision, our crew installed a Viking-driven slide gate on a driveway where a swing gate would have clipped the neighbor’s fence line. We set new post footings on the black clay, ran a rack and pinion track, and tied the operator into the existing keypad entry, keeping both the vehicle gate and the adjacent pedestrian gate live the entire day. Call (430) 226-4507 to discuss your shared driveway.
Yes, any new automatic gate in Allen must meet UL 325 entrapment protection standards, which typically means photocells, edge sensors, or both. Skipping this gets flagged at the HOA’s next walkthrough and must be retrofitted before the gate is approved. We install compliant entrapment protection on every automatic gate we hang in Allen. Call us for a quote that includes full UL 325 compliance.
Most gate installations in Allen take two to four working days, from footing pour through final operator programming. We keep the driveway usable during the work whenever possible; on a recent Twin Creeks slide gate install, both the vehicle gate and the adjacent pedestrian gate stayed live the entire day. We schedule the work around your access needs and tell you upfront what to expect. Call (430) 226-4507 for a timeline specific to your property.
Call Ironworks Gate Co. for Gate Installation in Allen, TX
Victor Salinas and the team at Ironworks Gate Co. have been hanging gates and wiring openers long enough to know Allen’s soil, Allen’s HOAs, and Allen’s expectations. When you call (430) 226-4507, you get a live person, a free estimate, and a written price before any work starts. We stand behind every Allen installation with the 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Allen, TX and surrounding Collin County communities.