Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Frisco
A new driveway gate in Frisco typically runs $3,400 to $9,800 installed, including the gate, posts, hardware, and basic automation. Most installations take one to two days on site once materials are ordered, and the single biggest variable you control is whether the design clears HOA architectural review the first time. If you live in a master-planned community like Stonebriar, Starwood, or any of the dozens of HOA-governed subdivisions across Frisco, the approval process matters as much as the welding. We coordinate with management companies, match builder specs, and stand behind the finished job with a written 90-Day Done Right Promise. Call (430) 226-4507 for a free estimate.
Why Ironworks Gate Co. Is Frisco’s Preferred Gate Installation Company
We have been installing gates and providing Gate Repair - Frisco for over 42 years, and the city’s housing boom gave us plenty of work. The city’s master-planned subdivisions went up fast between 2000 and 2020, and thousands of those homes got ornamental iron or powder-coated aluminum driveway gates as part of the original builder package. That means we know the hardware those builders used, the failure modes those gates develop, and the HOA rules that govern what you can and cannot install now. When you call us, you talk to a live person, not a voicemail tree, and the technician who shows up is background-checked and uniformed. We are not the cheapest option in Frisco. We are the company that gets it past the architectural committee and still working properly five years later.
The person behind the work is Victor Salinas, our owner, who has built this company around a simple standard: the 400th job gets the same care as the first. That is not marketing language. It is the K.E.Y.S. code every technician follows: Krafted right, Every time, Your home first, Standing behind it. Frisco homeowners tend to stay in their homes for decades. They want a gate that will outlast the next three Texas summers and every freeze after. That is exactly what we build.
Our Gate Installation Services in Frisco
We handle the full scope of Gate Installation work, from a single pedestrian gate on a side yard to a double swing driveway gate with full automation and vehicle detection. Here is how each type of installation plays out in Frisco specifically.
Driveway Gate
Most Frisco driveway gates are swing-style double gates, although sliding gates appear on wider lots and in communities with deeper setbacks. A new driveway gate in Frisco typically runs $4,200 to $9,800 with automation included. The design must match your HOA’s architectural standards, which usually means matching the original builder-spec picket profile, finial style, and powder-coat color. We pull the original spec sheet when it exists, photograph existing neighbor gates for reference, and submit documentation that gives the architectural committee what it needs to approve without a second round.
Pedestrian Gate
Side-yard pedestrian gates are one of the most common installations we do across Frisco’s 75033, 75034, and 75035 zip codes. These gates run $1,100 to $3,600 depending on width, material, and whether you want a keypad or intercom tied in. In older Frisco neighborhoods outside the HOAs, homeowners have more design freedom, and we can weld a custom gate that matches your fence line and your taste through our Gate Parts & Welding - Frisco services. In HOA communities, we still match the standard. Either way, the gate is built to handle Frisco’s soil movement without binding at the latch.
Sliding Gate
Sliding gates make sense when a swing gate would need to arc across a steep driveway or when the property has limited setback room. A sliding gate installation in Frisco typically runs $5,500 to $11,000, depending on length and whether we are installing a cantilever or track system. Frisco’s expansive clay soil is a real consideration here: track-style sliding gates can heave and bind if the base is not engineered correctly. We pour deeper footings and build a base that tolerates seasonal movement, which is the difference between a gate that slides cleanly for twenty years and one that needs a service call every spring.
Swing Gate
Swing gates are the standard in Frisco because most driveways are wide enough to allow them, and most HOA design guidelines were written around them. A single swing gate runs $2,800 to $6,500 installed; a double swing gate typically $4,200 to $9,800. The critical variable is hinge post depth. Frisco’s black clay expands and contracts dramatically with moisture, and a post set too shallow will lean within the first two wet seasons. We set posts below the active soil zone and weld heavy-duty hinges that hold alignment. If you are replacing an existing gate that shifted, we address the post footing, not just the gate panel.
Double Gate
Double swing gates dominate the larger lots in Starwood, Stonebriar, and other upscale Frisco communities. These installations require precise alignment of both leaves, matched automation with synchronized openers, and a center drop rod or latch that holds under wind load. A double gate installation in Frisco runs $5,800 to $12,500 fully automated. We install the operators, the safety edges, and the vehicle detection loop, and we program everything on site. The job is not done until both leaves close square and the operator cycles quietly without strain.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We are trained and equipped on nine gate automation brands, including LiftMaster, Mighty Mule, and BFT. Frisco’s builder-installed gates used a small set of operators, mostly LiftMaster and Elite, and we stock replacement boards, remotes, and safety sensors for those systems locally so we are not waiting on a parts shipment when your Frisco Gate Access Control goes down. If your existing gate uses a different brand, we can service it or replace it with a system that matches your HOA’s requirements and your expectations. We do not push one brand. We install the operator that fits the gate, the usage pattern, and the budget you have set.
Common Gate Installation Problems We See in Frisco Homes
- HOA architectural committee rejection over hardware details. A gate passes in one community and fails in another over a finial shape or a 1/4-inch picket spacing difference. We cross-reference the original builder spec before ordering any section, so you do not pay for a gate twice.
- Expansive black clay shifting new posts within the first year. Frisco’s soil is notorious for seasonal heave. A hinge post set at the same depth as a fence post will lean and throw the gate out of alignment. We pour deeper footings and use heavier post sections than the original builder typically did.
- Excavation severing keypad or loop detector wiring. When we dig for new posts, underground low-voltage wiring from the old gate operator is often in the way. A careless install severs it and the new gate has no vehicle detection. We locate existing utilities before digging and mark the run.
- Automation that was never matched to the gate’s weight and wind exposure. Frisco sees high spring wind gusts, and an undersized operator on a large double gate will fail early. We size the operator for the actual gate weight and the local wind load, not for the bare minimum.
Pricing for Gate Installation in Frisco, TX
Here are the ranges you can expect in Frisco’s market, based on the work we have done across 75033, 75034, and 75035:
- Pedestrian gate, powder-coated aluminum, manual: $1,100 to $2,600
- Pedestrian gate with keypad entry: $2,200 to $3,600
- Single swing driveway gate, manual: $2,800 to $4,800
- Single swing driveway gate, automated: $4,200 to $6,500
- Double swing driveway gate, automated: $5,800 to $9,800
- Sliding gate, automated: $5,500 to $11,000
- Custom ornamental iron double gate with full automation: $8,500 to $12,500+
The biggest cost drivers are gate width, material (aluminum costs less than wrought-look steel), automation brand, and whether we are coordinating HOA approval paperwork. Every price is quoted and agreed in writing before any work starts, so there is no surprise number on the final bill. Senior and veteran customers receive a permanent 5% discount. Gate Installation in Frisco is our specialty, and we know what this market charges because we work in it every week. Call (430) 226-4507 for an exact quote, or to schedule a free measure and site review.
We Also Serve Cities Near Frisco
While this page focuses on Frisco, our crews serve homeowners throughout the surrounding area, including Prosper, Little Elm, Plano, and Celina. If you live in one of those communities, the same 90-Day Done Right Promise applies. Call (430) 226-4507 and tell us where you are. We coordinate scheduling from our Dallas-Fort Worth office and dispatch to Frisco daily.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Frisco
Yes, and starting without it can be an expensive mistake. Most Frisco HOAs require architectural committee approval before any visible exterior change, including a gate, and the review typically covers style, height, finish, and hardware. In Starwood and Stonebriar specifically, the committees enforce strict standards that often require matching the original builder’s gate design. We help you prepare the submission package with drawings, material samples, and photos so the committee can approve it in one round. Call (430) 226-4507 before you order anything. We will tell you what your community is likely to require.
Frisco’s expansive black clay absorbs water in wet months and shrinks in drought, causing the ground to rise and fall by inches. A gate post set at fence-post depth will heave, lean, and throw the gate out of alignment, typically within the first two years. We set hinge posts below the active soil movement zone and use concrete footings sized for the gate’s weight and wind load. That is the only way to keep a swing gate closing true in this soil.
Sometimes, but not automatically. Many Frisco HOAs wrote their design guidelines around swing gates and may require a variance for a sliding gate. Some communities approve sliding gates for wider lots or steep driveways where a swing arc would cross the property line or block the sidewalk. Before you design around a sliding gate, check your community’s architectural standards. We can review your lot and tell you whether a sliding gate is feasible, and we can help with the variance request if it is. Call (430) 226-4507 and we will walk you through it.
Automatic gates in Texas must comply with UL 325 safety standards, which require at least two independent entrapment protection devices. For a new swing or sliding gate, this typically means a pair of photoelectric safety edges or an edge plus a photo eye, plus a reversing mechanism on the operator. We install the full required system on every automated gate, no exceptions. The equipment protects delivery drivers, children, pets, and anyone else near the gate path, and it keeps you compliant with state and national standards.
Frisco’s master-planned communities were built with uniform streetscapes, and the HOAs enforce architectural consistency to preserve property values. A replacement panel with a different picket profile, a mismatched powder-coat color, or a different finial style stands out from every other gate on the street, so the committee will flag it. We photograph the existing gate, cross-reference the original builder spec when possible, and order sections that match. In Stonebriar, for example, we matched a 2006 double swing gate’s original finish and finial profile exactly, which is why the replacement passed without a second review. That attention to detail is part of every installation we do in Frisco.
Call Ironworks Gate Co. for Your Frisco Gate Installation
If you are planning a new gate in Frisco, start with a phone call to a company that knows this city’s HOAs, soil, and builders. We answer live, 24 hours a day, 7 days a week. We will ask about your community, your lot, and what you want the gate to do, then give you a straight answer and a free estimate. The price is quoted and agreed before any work starts, and every job is backed by our written 90-Day Done Right Promise. Call (430) 226-4507 to schedule a free measure and site review.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Frisco and the surrounding North Texas communities with gate installation, repair, and automation services.