Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Prosper
Gate repair in Prosper usually comes down to one of three things: a post that has moved in the clay, an operator that was undersized from the day the builder installed it, or a hinge that has carried too much weight for too long. We fix all three, and we do it with a written 90-Day Done Right Promise on every job. If your gate is dragging, grinding, or refusing to open, call (430) 226-4507 and a live person will answer, day or night.
Our crews work throughout Prosper every week, from the Windsong Ranch and Star Trail corridors to the acreage lots east of Preston Road. We know this housing stock because we see it daily: 2010s and 2020s builds, ornate steel driveway gates, and automation that is now reaching the end of its first service cycle all at once.
Why Ironworks Gate Co. Is Prosper’s Preferred Gate Repair Company
Prosper homeowners tend to keep their houses for the long haul, and they remember the last contractor who cut a corner. That is exactly why we write our guarantee down and hand it over without being asked. Victor Salinas built Ironworks Gate Co. on a simple standard: if it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. Our Gate Repair team is trained on nine automation brands and carries the parts to fix most gates on the first trip.
Response time to Prosper matters more here than in older suburbs, because a gate stuck halfway open is a security and liability issue on a half-acre lot, not just an inconvenience. We dispatch from our Dallas-Fort Worth office and schedule Prosper calls with real travel time in mind, so you are not waiting through a four-hour window. Background-checked, uniformed technicians show up when we say they will.
Our Gate Repair Services in Prosper
Electric Gate Repair
Electric gate repair in Prosper is our most common call, and it usually traces back to an operator working against a gate that is out of alignment. We service LiftMaster, Ghost Controls, FAAC, BFT, and Mighty Mule systems, and we diagnose the whole assembly, not just the motor. A control board swap will not fix a gate that is binding on a leaning post, and we will tell you that before we sell you a part you do not need.
Automatic Gate Repair
Automatic gate repair on Prosper’s newer builds often means replacing a builder-grade operator that was never sized for the gate it runs. Many production builders install the smallest unit that will pass inspection, and those units fail right around the five-to-seven-year mark. We replace them with properly rated operators and set the travel, force, and entrapment protection correctly the first time.
Hinge & Post Repair
In Prosper’s western subdivisions built between 2015 and 2019, gate sag almost always comes from post footing failure in the expansive black clay, not hinge wear. That is a problem rarely seen in neighboring Celina or Frisco, where soil composition and build timing differ. We reset posts to deeper footings, weld cracked hinge barrels when the metal is sound, and replace hinges only when they are genuinely worn out.
Gate Realignment
A Prosper gate that scrapes the driveway or will not latch is usually fighting the seasonal movement of Collin County clay. Wet winters swell the soil, dry summers shrink it, and the post moves a little more each cycle. We realign the gate to the post as it actually sits, then address the footing so the repair holds through the next wet-dry cycle instead of failing again in eight months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Prosper
We are trained and equipped on nine gate-automation brands, and the ones we see most in Prosper are LiftMaster, Ghost Controls, and Mighty Mule. We keep common control boards, limit switches, and receiver parts stocked for these units so most Prosper repairs are completed in a single visit. If your operator is a brand we do not stock, we still carry universal hardware and can usually have a proprietary part within a day or two.
Common Gate Repair Problems We See in Prosper Homes
- Post lean from clay heave. Prosper’s black clay soil swells and shrinks with every wet-dry cycle, and gate post footings set shallower than about 36 inches move over time. The gate starts dragging or the latch misses, and the fix is a footing reset, not hinge replacement.
- Builder-grade operator burnout. Many production builders installed the least expensive LiftMaster or Ghost Controls unit they could find. Those units work hard enough when everything is aligned, but once the gate starts binding against a shifted post, the motor burns out fast.
- Missing or undersized conduit. In homes built before 2019, we often find surface-mounted wire runs from the house to the gate because conduit was never buried during construction. The wire degrades, shorts, or gets hit by lawn equipment, and the gate stops dead.
- Swing gate geometry drift. Even on gates with solid posts, years of use and seasonal soil movement push the two leaves out of plane. One side closes before the other, the lock bar misses, and the operator strains against the misalignment on every cycle.
Pricing for Gate Repair in Prosper, TX
A typical gate realignment in Prosper runs $180 to $320, depending on how far the gate has moved and whether the operator needs reprogramming afterward. Hinge and post repairs run $225 to $550 for most residential gates, with full post footing resets starting around $400 when the post has to come out and be re-set in concrete. Electric gate repair runs $150 to $480 for most operator diagnostics and part replacements; a new operator installed runs $850 to $1,800 depending on the unit and the gate weight. Every price is quoted and agreed before any work starts. Call (430) 226-4507 for a free estimate, and remember we offer $50 off any repair over $250 and a free second opinion on any written estimate.
We Also Serve Cities Near Prosper
Our crews cover Prosper and the surrounding communities, including Frisco, Celina, Little Elm, and McKinney. If you are in one of those areas and need gate work done, we will send the same background-checked technicians with the same written guarantee. Learn more about our full coverage at Gate Repair in Prosper and the neighborhoods we serve.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Prosper
Your gate is hitting the ground because the hinge post has moved, not because the gate itself bent. Prosper’s black clay soil heaves when it takes on water, and after a wet spring the post has shifted enough to drop the free end of the gate. The permanent fix is a post footing reset to a deeper depth, not shimming the hinge. Call (430) 226-4507 and we will confirm the cause on site with a level and a tape measure, free of charge.
If your LiftMaster operator is a builder-grade unit that came with the house and it is more than five years old, replacing it is almost always the better long-term decision. Those units were sized to pass inspection, not to run a heavy steel gate for a decade, and repairing one usually means spending money on a motor that will fail again. We will show you the difference in price and duty rating and let you decide.
Yes, and we do it regularly in Prosper. Many homes in subdivisions like Star Trail and Whisper Farms were built with manual iron gates, and owners later want the convenience of an opener. What most people do not realize is that the gate has to be structurally sound first: solid posts, unworn hinges, and a gate that swings freely. We add the opener, run the conduit properly, and set the entrapment protection to code.
Rain causes the clay under a slide gate track to swell, which lifts the track slightly and makes the gate drag. The operator senses the added resistance, trips its obstruction sensor, and reverses. The cure is to re-level the track and address drainage under the gate, not to crank up the force setting. We see this often in Prosper after a heavy spring rain.
Yes, you need it, and any legitimate gate company in Prosper will install it as part of the job. Entrapment protection, which means photo eyes, contact edges, or both, stops the gate when a person, pet, or vehicle is in the path. It is not optional equipment on an automatic gate, and a company that quotes you a lower price by leaving it out is putting your family at risk. Call (430) 226-4507 for a quote that includes it, as it should.
Call Ironworks Gate Co. for Gate Repair in Prosper
If your gate is not closing right, dragging, or making a sound it did not make last month, call (430) 226-4507. A live person answers, day or night. We will schedule a time that works, show up when we say we will, and quote the job before any work begins. Victor Salinas and the Ironworks Gate Co. team have been doing this work for over 42 years, and we stand behind every gate we touch with our written 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Prosper and the surrounding North Texas communities.