Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in McKinney?
In McKinney, a professional driveway gate installation typically costs between $2,500 and $12,000, depending on the size, material, and whether the system is manual or automated. Most homeowners in our area find that a high-quality, automated steel or aluminum driveway gate installation averages around $6,500 when factoring in site preparation, motor installation, and safety compliance.
The price varies based on your specific driveway width, the weight of the gate, and the type of motor needed to operate it reliably. Because our local soil in McKinney is primarily expansive clay, we often have to invest extra time in the foundation to ensure the gate posts remain level over the next decade. If you are looking for an exact quote for your property, call us at (430) 226-4507 for a free estimate.
Gate Installation Cost Breakdown (2026)
When you look at a quote for a gate, you are paying for more than just the metal. You are paying for the engineering, the concrete foundation, the electrical work, and the automation hardware. We break down the estimated costs for the McKinney market below to give you a clear picture of what to expect.
| Gate Project Type | Estimated Cost Range |
|---|---|
| Manual Pedestrian Gate (Installation Only) | $800 - $1,800 |
| Basic Manual Driveway Gate (Steel/Aluminum) | $2,500 - $4,500 |
| Automated Driveway Gate (Standard Motor) | $5,500 - $8,500 |
| Custom Estate Gate with High-End Automation | $9,000 - $14,000+ |
| Gate Motor Replacement (Hardware + Labor) | $1,200 - $2,800 |
These numbers assume standard driveway configurations. If your driveway requires significant grading or if you need to run new electrical conduit from your home to the gate entrance, these costs will adjust accordingly. At Ironworks Gate Co., we believe in upfront pricing. We assess your property, determine the specific needs of your gate, and provide a clear quote before we turn a single bolt. You will never see surprise charges on your final bill.
What Affects Gate Installation Pricing in McKinney
When Victor Salinas started this company back in 1984, the goal was simple: provide the kind of service that lasts. Over the last 42 years, we have seen every type of gate failure imaginable in North Texas. These are the factors that actually drive the price of your installation, and why we refuse to cut corners on the basics.
- Soil Conditions (The McKinney Factor): Our local clay soil is notorious for expanding and contracting with the weather. If we install a gate post in a shallow hole, it will lean within two years. We invest in deeper, wider concrete footings to anchor your gate, which adds to the initial labor cost but prevents thousands of dollars in realignment repairs later.
- Automation Brand Selection: We are trained and equipped on nine specific gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A high-torque motor for a heavy iron gate costs more than a standard residential unit, but it prevents the motor from burning out under the Texas summer heat.
- Electrical Infrastructure: If your gate is 100 feet from your house, the cost of trenching and running code-compliant electrical conduit is a major factor. We do not use extension cords or temporary wiring; we install permanent, safe, and protected power lines.
- Gate Material and Weight: A custom wrought iron gate is heavier and requires more robust hinges and a stronger motor than a lightweight aluminum or vinyl gate. The weight dictates the hardware requirements, which is a significant part of the total price.
- Safety Compliance: Every gate we install must meet modern safety standards. This means installing photoelectric eyes, safety loops, and obstacle-sensing technology. These are not optional add-ons; they are requirements to prevent injury, and they are built into our standard installation pricing.
The Importance of Professional Installation
When you are dealing with gate automation, you are working with high-tension springs, heavy metal, and electrical systems. This is not a weekend hobby project. We have seen too many homeowners attempt to install their own gate openers, only to have the system fail during a storm or, worse, cause an injury because the safety sensors were wired incorrectly.
As a company that has been serving McKinney for over 42 years, we approach every job with the same care we would use on our own mother’s home. Our technicians are background-checked and uniformed, and they follow the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. We know that the 400th job we do needs to be just as solid as the first one we did in 1984.
If you have questions about whether your current gate can be automated or if you need a brand-new installation, call us at (430) 226-4507. We are happy to talk you through the requirements for your driveway.
How to Save on Gate Installation
We know that a new gate is a significant investment for your home. While we never recommend buying the cheapest motor or using sub-par materials, there are ways to manage the cost of your project effectively.
- Get a Second Opinion: If you have an estimate from another company that seems high, or if you feel like you are being sold equipment you do not need, we offer a Free Second Opinion on any written estimate. We will tell you if the price is fair or if there is a better way to handle the job.
- Bundle Your Services: If you need other work done, such as a gate repair or a seasonal tune-up, doing it at the same time as your installation can save on labor costs.
- Maintenance is Cheaper than Replacement: The best way to save money on a gate is to make it last. Our $89 Seasonal Tune-Up keeps your hinges lubricated, your sensors aligned, and your motor running smoothly. A well-maintained gate can last decades, while a neglected one often needs replacement in just five or six years.
- Use Our Standing Discounts: We offer a 5% discount for all seniors and veterans. We also have a standing offer of $50 off any repair over $250.
Call (430) 226-4507 to speak with a live person about your project. We do not use voicemail trees or callback queues, so you will always get a human on the line who can help you plan your budget.
Understanding Gate Materials in McKinney
The material of your gate does more than just determine the look of your entryway. It determines how much maintenance you will need to do and how long the gate will last in our Texas climate. We see three main categories of materials used in McKinney homes.
Wrought Iron
This is the classic choice. It is heavy, durable, and provides the highest level of security. However, wrought iron requires regular maintenance. Because of our humidity, the paint can chip, and rust can set in quickly. If you choose wrought iron, be prepared to have it repainted or touched up every few years to keep it looking sharp. We specialize in welding and repair, so we are often called to fix these gates when the hinges sag or the paint fails.
Aluminum
Aluminum has become very popular in the last decade because it does not rust. It is lightweight, which puts less strain on your gate motor and hinges. This often means your motor will last longer. It does not have the same “heft” as iron, but it is an excellent choice for homeowners who want a clean, modern look with very little maintenance.
Steel
Steel is the middle ground. It is stronger than aluminum but less prone to rust than traditional iron, provided it is properly powder-coated. We often recommend steel for estate gates where security is the primary concern but you do not want the constant upkeep of wrought iron.
When we visit your home for a Gate Installation in McKinney, we will discuss these materials based on your specific needs. If you have pets or small children, we might suggest a different design than if you are simply looking for aesthetic curb appeal. We ensure your gate is not just a barrier, but a functional piece of your home’s infrastructure.
Safety and Automation Standards
You might think a gate is just a metal door, but in the eyes of the law and safety standards, it is a machine. Modern gate openers must comply with UL 325 standards. This means your system must have built-in entrapment protection. If the gate touches an object, it must reverse direction immediately. If your current gate does not have these sensors, it is a liability risk.
We are trained on nine leading gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We know the quirks of each system. For example, a Viking motor might be perfect for a long, heavy driveway, while a LiftMaster unit might be the better choice for a standard residential swing gate. We do not push one brand over another because we have a partnership; we recommend the motor that is right for your specific gate weight and usage frequency.
If you are experiencing issues with your current system, don’t wait for it to fail completely. A gate that reverses unexpectedly or makes a grinding noise is telling you that something is wrong. Call (430) 226-4507 before a minor issue becomes a major repair bill.
FAQs - Gate Installation Cost
How much does it cost to fix a gate that won’t open?
A gate repair typically ranges from $150 to $600, depending on whether the issue is a simple sensor misalignment, a bad circuit board, or a mechanical failure in the motor. We provide an upfront price before we start, so you know exactly what the fix will cost. Call (430) 226-4507 for a free estimate.
Is it cheaper to repair or replace my driveway gate?
In most cases, we can repair a gate for a fraction of the cost of a new installation. We only recommend replacement if the frame is rotted, the structural integrity is compromised, or the cost of parts for your specific (obsolete) motor exceeds the cost of a new, reliable unit. We will give you an honest assessment of whether a repair is a sound investment or a waste of your money.
How long does a gate installation take?
A standard gate installation usually takes two to three days. The first day is for site preparation, post setting, and concrete pouring. We must let the concrete cure properly before we attach the gate and the motor. The second or third day is for the installation of the gate, the electrical connections, and the testing of the safety systems.
Do you handle the HOA paperwork for gate installations?
We provide all the necessary technical specifications, drawings, and material details for your gate so you can submit them to your HOA for approval. While we cannot attend your HOA board meeting, we make sure you have every piece of documentation required to get your project approved quickly.
Can you fix my gate today?
We offer 24/7 live phone support, and we prioritize emergency calls for gates that are stuck open and compromising your security. While we cannot always guarantee a same-day repair due to the nature of the work, we have a strong local reputation for being there when we say we will. Call (430) 226-4507 to see our current availability.
The Ironworks Gate Co. Promise
We know that in this industry, trust is hard to come by. You have likely heard stories about contractors who disappear after the check clears or who leave a job half-finished. That is not how we operate. When we finish a gate, we stand behind it with our 90-Day Done Right Promise.
This is not a complicated legal document. It is the Keystone Standard of our company. If the job is not right, we come back and we make it right. No paperwork, no arguing, no hassle. It is that simple. We have been in business since 1984 because we treat our neighbors in McKinney with respect. We are not looking for a quick paycheck; we are looking to be the company you call for the next forty years.
Whether you need a new gate installation, a motor repair, or just a seasonal tune-up, we are here to help. You can read more about our home services or specifically about our process on our Gate Installation in McKinney page. We are a locally owned and operated business, and we are proud to serve this community.
Pricing reflects the McKinney market as of 2026. Ironworks Gate Co. offers free estimates - call (430) 226-4507. Written by Victor Salinas, Owner at Ironworks Gate Co., serving McKinney since 1984.
What Our Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales