Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Installation in McKinney: What to Know First
Linear gate installation in McKinney typically runs $1,800 to $5,400 for a complete single driveway gate with a Linear opener, and most jobs are measured, ordered, and installed within two to three weeks. We’re an independent Linear service provider, not a factory-authorized dealer, which means we answer to you first and Linear second. This page is for McKinney homeowners who already own a Linear opener or panel and need it hung, wired, and dialed in correctly. Call (430) 226-4507 for a free on-site measure and written estimate.
Key Takeaways
- We install and service the full Linear line: ACT-31B, ACT-34B, M3, LRA slide operators, and the APeX/AM3 keypad and receiver systems.
- We are not owned by, operated by, or authorized by Linear. We’re an independent shop that has worked on their equipment for decades.
- Every Linear installation carries our written 90-Day Done Right Promise, and the price is settled before we order a single part.
How Linear Products Fail - and How We Fix Them
Linear makes dependable equipment. The failures we see on McKinney gates are less about the brand and more about installation shortcuts, Texas weather, or the age of the board. Here is what we find on real service calls, and what we do about it.
- ACT-31B / ACT-34B swing-arm operators: the limit switch drifts after a brownout. These older analog arms are common across Stonebridge Ranch and Eldorado Heights. They’ll work fine for years, then a summer storm knocks the power and the arm forgets its open and closed positions. The gate slams into the stop or reverses mid-travel. We reset the limits and often add a small surge protector at the outlet. If the board is fried, we replace it with an OEM or quality aftermarket board rather than condemning the whole operator.
- M3 and LRA slide operators: chain tension loosens and the gate lurches. Linear slide motors rely on proper chain tension. In McKinney’s clay soil, gate posts shift slightly with wet-dry cycles, and that throws off the chain. The symptom is a gate that jerks at startup or makes a slapping sound mid-travel. We re-tension and align the chain, check the idler pulleys, and weld any cracked post brackets while we’re there.
- Plug-in transformer failures on residential swing kits. Linear ships a black plug-in transformer with many residential operators. After five to seven years of North Texas heat, the epoxy inside degrades and the transformer delivers low voltage. The arm moves at half speed or not at all. We replace it with a weather-rated transformer in a sealed box, not another wall wart, so the repair lasts longer than the original.
- Photo-eye misalignment from post movement. Every Linear gate has safety photo-eyes, and when a post shifts even a quarter inch, the beam breaks and the gate refuses to close. Homeowners call thinking the board is dead. It’s usually the eye. We realign the eyes, shim the brackets, and if the post has moved enough to matter, we re-set it or weld a brace plate so the problem doesn’t return every six months.
- Gearbox wear on Linear heavy-duty swing arms, especially bigger custom gates. On estate gates in Gunter and Celina with 900-pound panels, the internal gearbox wears after about eight to ten years. The gate opens in jerks, or the motor hums and the panel doesn’t move. We rebuild or replace the gearbox in the field, and we’ll tell you honestly if the arm has enough life left or if a new Linear or LiftMaster unit makes more sense.
Our Linear Gate Installation Process
- 1
You call (430) 226-4507. A live person answers, day or night. We ask about your gate, your Linear opener model, and whether anything has failed or if this is new construction.
- 2
We come out and measure. A uniformed, background-checked technician visits your McKinney property, inspects the gate panel, posts, hinges, existing wiring, and the Linear unit. We check post plumb, panel weight, and opener compatibility before we ever quote a price.
- 3
We give you a written estimate. The price includes parts, labor, and any wiring or welding needed. Nothing is started until you approve the number in writing. No surprises on the bill, ever.
- 4
We install. The gate is hung on properly sized posts, the Linear opener is mounted and wired, safety edges and photo-eyes are installed and tested, and limit switches are set correctly.
- 5
We test everything in front of you. We cycle the gate a dozen times, test auto-close, obstruction reversal, battery backup, and any keypad or remote. If it moves when it should not or stops when it should, we will find out why before we leave the driveway.
- 6
We walk the job and hand you the guarantee. Every Linear gate installation is covered by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
What Linear Gate Installation Costs in McKinney
Every gate is different, so we price each job on site. These are the ranges McKinney homeowners can expect for typical Linear work.
- Mount and wire a Linear swing-arm opener onto an existing gate: $850-$1,600.
- Full single swing gate, fabricated steel or aluminum, with a Linear ACT-34B opener: $2,200-$4,200.
- Full double swing gate with dual Linear arms and center lock: $3,800-$6,500.
- Sliding gate panel with a Linear M3 slide operator, track, and stops: $3,200-$5,800.
- Pedestrian walk gate with Linear keypad and electric strike: $1,400-$2,800.
What moves the price: panel weight, post condition, trenching distance for power and data lines, and whether you want accessories like battery backup, vehicle loop detectors, or smartphone control. The estimate we give is the price you pay, and it includes the written 90-Day Done Right Promise. Call (430) 226-4507 for a free, no-pressure measure and quote.
Why McKinney Homeowners Call Ironworks Gate Co. for Linear Work
Victor Salinas grew up off Eldorado Parkway, back when that stretch had more pasture than pavement. He’s been working on gates across Collin County for the better part of three decades, and the company has been in business since 1984. That longevity matters when you own a Linear opener that needs a board, a chain, and a set of safety eyes to all work together the way the factory intended.
We’re not a general contractor dabbling in gates. We’re gate people. Our technicians are trained on nine opener brands, including Linear, LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. So if you bought a house with a Linear opener and we find that a previous owner Frankensteined in a Ghost Controls board, we can sort that out without a four-hour diagnostic fee. A live person answers our phone 24 hours a day, seven days a week. And every job is protected by the 90-Day Done Right Promise, written and non-negotiable.
FAQs
No. In most cases, professional installation preserves the manufacturer’s warranty. What voids a Linear warranty is improper wiring, incorrect voltage, or the removal of required safety devices. As an independent Linear service provider, we install to factory spec and keep all safety equipment intact, which keeps your warranty alive. If you want to know exactly where your opener stands, call (430) 226-4507 and we’ll check the serial number and date code.
Yes, and we do it often. If your Linear opener is less than eight years old and in good shape, we can build or source a new gate panel to match its weight rating. We’ll inspect the opener’s limits, gearbox, and board before we commit, and we’ll tell you honestly if the older opener would shorten the life of a new gate. Estimates are free, and the decision is always yours.
We keep common Linear parts on our trucks: control boards, limit switch assemblies, capacitors, remote receivers, and photo-eyes. Less common items, like an entire M3 slide motor or a specialized gearbox, may take a day or two to source. We will tell you the wait before you approve any work, and we never charge for parts we don’t install.
If your gate panel and posts are already sound, we can often mount and wire a Linear opener in a single visit. New gate fabrication takes longer, typically two to three weeks from measure to install because the panel is built to your opening and finished to spec. We always tell you the schedule upfront, and we show up when we say we will.
The deciding factors are age and board condition. A Linear actuator or slide operator under ten years old is usually worth repairing. Once a unit is past fifteen years, parts get scarce and a modern replacement will be quieter, faster, and more reliable. We’ll show you the cost of both options side by side and let the math make the decision. Call (430) 226-4507 and we’ll walk through it with you.
Call for a Free Linear Gate Installation Estimate in McKinney
If you live in McKinney, Fairview, Prosper, Celina, or anywhere nearby in Collin County and you need a Linear gate installed, repaired, or simply looked at, call us at (430) 226-4507. A live person answers, we’ll schedule a measure that works for you, and you’ll get a written price before any work begins. That’s how we’ve done it since 1984, and that’s how we’ll do it for the next forty years.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving McKinney and nearby areas.