Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Prosper, TX | Ironworks Gate Co.
Ghost Controls gate repair in Prosper typically runs between $180 and $600 depending on whether you’re dealing with a sensor, an arm, or a post footing issue. We’re an independent service provider, not a Ghost Controls factory shop, and we’re on call across Prosper for everything from error codes to full operator swaps. Here’s the single most useful thing to know before you spend a dime: in Prosper’s western neighborhoods built between 2015 and 2019, the “gate dragging on one side” symptom is almost never a bad arm. It’s a shallow post footing. More on that below. Call (430) 226-4507 and a live person answers, day or night.
Why Prosper Residents Choose Us for Ghost Controls Service
We have spent hundreds of hours diagnosing Ghost Controls kits on Prosper’s iron gates. That matters because Prosper is not a generic suburb. The gates here are nearly all automated, nearly all ornamental steel, and nearly all mounted on the same expansive clay that moves more than the builders planned for. Victor Salinas, our owner, learned metalwork and basic electrical at Collin College’s Technical Campus in McKinney and has been repairing gates across Collin County for close to three decades. His rule: “If it moves when it should not or stops when it should, we will find out why.” We bring Ghost Controls OEM arm assemblies, boards, and remotes in our local van stock so most Gate Repair in Prosper jobs wrap up in one visit. When a part sits on national backorder, we offer a compatible aftermarket arm with the correct stroke length and tell you plainly before we install it. We’re also one of the few shops that repairs boards and motors when it’s cheaper than a full replacement kit. For systems older than seven years on heavy iron gates, we’ll often recommend upgrading to a current Ghost Controls AXP1 for better torque, and we’ll walk you through the numbers before any work begins.
Common Ghost Controls Gate Repair Problems We Solve in Prosper
- Error 61 on the AXP1 in the afternoon. This is the most common Ghost Controls call we get in Prosper. The controller reads an obstruction or binding in the arm. On the black clay here, posts lean inward by fractions of an inch over the season, and that half inch is enough to bind the slave arm on a 16-foot double gate. We reset posts and reprogram limits rather than replacing a good operator.
- Solar kit dead after a freeze. The February 2021 ice storm and the hard freezes since have killed plenty of Ghost Controls TSS1 battery backups in Prosper. The panel survives; the sealed battery inside cracks. We replace the battery, test the charge controller, and add a heater if the gate sits in a shaded north-facing corner.
- Gate dragging on the latch side. In Windsong Ranch and other 2015-2019 subdivisions, builders set posts at the Collin County frost-line minimum. That is too shallow for this clay. The gate sags, the operator strains, and homeowners think they need new hinges. They usually need a post flush and reset with deeper concrete.
- Clicking at the end of travel. A Ghost Controls AXS1 arm that clicks when it reaches full open or full close has a limit switch or a pickup point that has drifted out of alignment. Prosper’s clay heave shifts the geometry enough to confuse the travel sensor. It’s often a fifteen-minute repair if we catch it before the arm motor burns out.
- Short-range remote only. When a Ghost Controls remote works from ten feet but not from inside a car at the street, the receiver antenna is usually pinched inside a steel gate post or buried behind the operator housing. Prosper’s ornamental steel gates are denser than they look, and the post itself blocks the signal. We relocate the antenna or add a remote receiver kit.
Ghost Controls Service in Prosper: What Local Conditions Mean for Your Equipment
Here is a fact that shapes every Ghost Controls repair we do west of the Dallas North Tollway in Prosper. The builders who put up Windsong Ranch, Lilyana, and the surrounding subdivisions between 2015 and 2019 set gate posts at the minimum depth the Collin County frost line required. That depth is adequate for frozen ground, but it is not adequate for the shrink-swell clay that expands every spring and contracts every August. A Ghost Controls AXP1 on a double iron gate mounted to a shallow post will work fine for the first few years. Then the first wet-dry cycle moves the post by a quarter inch. The second moves it a little more. By year five or six, the gate drags, the motor strains, and the controller starts throwing obstruction codes. The fix is not a new operator. It is a post reset: pull the post, drill a wider footing, pour deeper concrete, rehang the gate, and reprogram the open and close limits. We quoted a job in Lilyana recently where the homeowner had been told by another company they needed a new $2,400 operator. The posts had moved. We fixed it for under $600 and the gate still closes like it was hung last week. If you own a Ghost Controls gate in a Prosper subdivision built in that window, and the latch side drags, ask the technician to check the post feet before they quote you an arm.
Ghost Controls Models & Products We Service in Prosper
We work on the full Ghost Controls line that shows up on Prosper driveways: the AXP1 automatic gate opener kit, the TSS1 solar opener kit, the LSM1 vehicle sensor, and the AXS1 swing arm opener. We carry OEM arms, boards, remotes, and sensor kits in our van stock for fast Prosper turnaround. When Ghost Controls has a factory backorder, we use quality aftermarket arms with matching stroke lengths, always disclosed before we install. We repair boards and motors when the math favors repair. For operators older than seven years on heavy wrought iron, we usually recommend a new AXP1, not because we like selling operators, but because the torque improvement on a long double gate is real and the old board is usually the next part to fail. For complete Ghost Controls sales & service details, that page has the full scope of what we stock and support.
Ghost Controls Service Pricing in Prosper
Most Ghost Controls repairs in Prosper land between $180 and $600. A simple limit switch adjustment or remote reprocess runs toward the low end. A post reset with new concrete runs higher. A full AXP1 replacement with new arms and a reprogrammed controller is the upper range, and we quote that in writing before ordering anything. What drives the cost: whether the posts have moved, whether the operator needs replacing or can be repaired, and whether the gate itself needs rehanging. Every estimate is free, and the price is agreed in writing before we turn a single bolt. Call (430) 226-4507 for a number that will not change on you the next morning.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Prosper
Error 61 means the controller thinks the arm is binding. On Prosper’s clay, the usual cause is that both gate posts have leaned inward by a fraction of an inch as the soil expands, and the slave arm is binding against the gate frame. It happens in the afternoon because that’s when the gate has had hours of sun on the steel and the clay has shifted from morning moisture. We reset the posts with deeper concrete and re-machine the pickup point, then clear the code. Call (430) 226-4507 and we’ll diagnose it in person.
Yes. We do this regularly on Prosper’s manual gates, and the AXP1 is the kit we use most often for our Gate Installation in Prosper on double iron gates under 16 feet. The main challenge is not the opener, it is the state of the posts: if the posts were set shallow, we pour deeper footings before mounting the arms so you do not create a new error code the first summer. We run the power or confirm your solar panel placement, mount the arms, install the safety sensor, and program the travel limits.
Cold snaps crack the sealed lead-acid battery or freeze a compromised cell inside the TSS1 battery box, and a damaged battery will not take a charge even when the solar panel is producing. The panel can look perfect while the battery is done. We test the panel output, replace the battery, and in shaded or north-facing Prosper yards we can add a hardwired power option so the gate doesn’t depend on a battery that sits half-charged through a North Texas winter. Call (430) 226-4507 for a free estimate.
The click is the limit switch or pickup point hitting slightly out of sequence. On Prosper’s clay, gate geometry moves enough that the arm reaches its hard stop a beat before the controller tells it to. We re-machine the pickup point, adjust the limit, and re-torque the arm hardware so the click disappears. If left alone, the motor fights the stop on every cycle and eventually burns the brushes. Call us before that happens.
Your receiver antenna is most likely pinched behind the steel post or buried inside the operator housing, and the post is eating the signal. Prosper’s ornamental steel gates and posts shield the receiver more than the plastic-housed openers you see on ranch land. We move the antenna out to a clear position or add a remote receiver kit, and your remote will open the gate from the street like it should. Call (430) 226-4507 for a quick antenna relocation.
Service Areas Near Prosper
From our shop serving all of Prosper, we run Ghost Controls service calls into McKinney, Anna, Celina, Melissa, and Princeton. If your gate is acting up and you’re anywhere in the Prosper service area, we can be there quickly. We also offer Ghost Controls service in Anna and Ghost Controls service in McKinney for property owners a bit further out.
Book Your Ghost Controls Service in Prosper Today
One call to (430) 226-4507 gets you a live person, a straight answer, and a written price before any work starts. We cover Ghost Controls repairs across Prosper every weekday and we run emergency calls for dead gates and stuck operators. The estimate is free. The fix is guaranteed. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Prosper since 1984.