Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for McKinney Homeowners
Our Gate Access Control in McKinney typically costs between $450 and $2,800 depending on whether you need a simple keypad added to an existing opener or a full multi-point entry system with video intercom, and most jobs are completed in a single visit. We’re Ironworks Gate Co., and we’ve been serving McKinney homeowners since 1984, which means we’ve seen every access control setup Collin County can throw at us, from weathered keypads on Craig Ranch estate gates to phone-entry retrofits in Stonebridge Ranch. Victor Salinas leads our team with the same standard we’ve always held: the job gets done right the first time, quoted before we start, and backed by our written 90-Day Done Right Promise. If your gate access has stopped responding, call us at (430) 226-4507 and a live person will answer, day or night.
What Our Gate Access Control Service Includes
Keypad Entry
A keypad mounted at the driveway lets you open the gate with a four-to-six digit code instead of fumbling for a remote or getting out of the car. We install hardwired and wireless keypads, program codes for family members, guests, and service workers, and replace worn-out keypads that have gone blank from Texas sun exposure. If your existing keypad works intermittently after a hard rain, the problem is usually in the wiring or the membrane seal, and we’ll diagnose it on the first trip out.
Remote Control
Handheld remotes and visor-clip transmitters remain the most common way McKinney homeowners open their driveway gates, and we program and replace remotes for every major opener brand. When a remote stops working, it’s often a matter of syncing, battery corrosion, or a receiver board issue rather than a dead motor, so we test the signal path before selling you parts you don’t need. We can add multiple remotes to a single system and set them up so each one is clearly labeled for the vehicle it belongs to.
Phone Entry
Phone entry systems, sometimes called cellular gate openers, let you buzz the gate open from an app or a phone call, which is useful when you’re away from home and need to let in a delivery or a neighbor. We install and configure phone entry modules that work with your existing gate opener, so you don’t have to replace the whole operator just to get remote access from your phone. These systems run on a cellular connection rather than your home Wi-Fi, which matters in McKinney neighborhoods where the gate sits too far from the router to get a reliable signal.
Card Reader
Card readers and proximity fobs are common on HOA community gates and some larger estate properties in the McKinney area, letting residents tap a card or fob at the reader instead of punching a code. We install, wire, and program card readers that integrate with your gate’s automation and can support hundreds of unique credentials if needed. When a card reader fails, it’s usually a wiring fault at the junction box or a worn-out reader face, and we keep the common replacement parts on the truck.
Video Intercom
A video intercom at the gate lets you see and speak with a visitor before you open the gate, which is a practical upgrade for homeowners who get frequent deliveries or want to screen unknown callers. We install two-wire and IP-based video intercom stations, run the needed low-voltage wiring with proper weatherproof conduit, and pair the unit with your existing gate operator. On older McKinney homes with long driveways, we typically recommend an IP system with a signal booster so the video feed doesn’t lag or drop.
Smart Access
Smart access control ties your gate into your home automation system, so you can open the gate from a phone app, set schedules, and receive alerts when the gate opens or closes. We retrofit smart modules onto existing LiftMaster, FAAC, BFT, and Mighty Mule operators, which means you often don’t need a brand-new opener to get app-based control. Our technicians configure the system with the app on your phone before they leave the driveway, so you’re not left with a box of instructions and a blinking light.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
We carry OEM and compatible access control parts for LiftMaster and FAAC systems, the two brands we see most often on McKinney driveway gates. On LiftMaster units, the most common call we get is a keypad that won’t hold a code after a power surge, and we keep replacement logic boards in stock so the fix happens the same day. FAAC gates, especially the older models still running on original 2000s-era control panels, tend to need careful voltage testing before we add any new access component, because a mismatched accessory can trip the board.
For BFT and Mighty Mule systems, we stock the transmitter and receiver parts that fail most often and we program them on-site rather than sending you to a dealer. Whether your gate runs on one of these brands or something else entirely, we’ll identify it on the call, bring the right parts, and quote the job before any work starts. Visit our home page to see the full range of what we do, or compare our Gate Access Control in Prosper service if you live on the west side of Collin County.
Signs You Need Gate Access Control Right Now
- Keypad codes stopped working overnight. When a keypad stops accepting any code, the cause is usually a dead battery, a blown inline fuse, or a damaged wiring run from the house to the gate. If you’re keying in the code three or four times before the gate responds, the keypad membrane is wearing out and it will fail completely, usually at the worst possible time.
- Remote works only when you’re within ten feet of the gate. A remote that used to open the gate from the street but now only works from the driveway points to a failing receiver or a weak antenna connection. The longer you run it this way, the more likely the receiver board will burn out entirely and take the whole opener out with it.
- The gate opens on its own or won’t close completely. Erratic open-and-close cycles often trace back to a fault in the access control loop, like a shorted keypad wire or a stuck relay on the control board. Left alone, a gate that cycles on its own can burn out the motor or, worse, close on a car or a person.
- You’re sharing one remote between two cars. If you and your spouse have been trading a single clicker back and forth for months, that’s a fixable problem in one visit. We can program additional remotes or add keypad entry so everyone in the house has their own way in, and you never have to leave the gate open for a family member coming home late.
- Your intercom buzzes but you can’t hear or see anyone. On older two-wire intercoms, audio degradation happens slowly and then all at once. If your visitor can hear you but you can’t hear them, or the video feed is black, the indoor monitor or the outdoor station needs replacing, and it’s a straightforward swap when the wiring is still intact.
Our Gate Access Control Process - Step by Step
- 1
Call and describe what’s happening. When you call (430) 226-4507, a live person answers and asks specific questions about your gate, your opener brand, and what the access system is doing or not doing. We schedule a visit at a time that works for you, and we confirm the appointment the day before.
- 2
On-site diagnosis. Our technician arrives in a marked truck, walks the gate with you, and tests the access control components with a multimeter to isolate the fault. We check the wiring at the junction box, the antenna connection, the power supply, and the control board before we recommend any repair or replacement.
- 3
Written upfront price. Once we know what’s wrong, we hand you a written price for the parts and labor before a single bolt is turned. That price is the price. If anything unexpected comes up mid-job, we stop and talk to you first.
- 4
Repair or installation on the spot. Most access control jobs are completed in a single visit because we stock the common replacement parts on the truck. We test the system with you standing there, program your codes and remotes, and make sure the gate opens and closes smoothly through the new access point.
- 5
Walkthrough and follow-up. Before we leave, we show you exactly what was installed or repaired, how to operate it, and what to do if anything behaves oddly. Every job is covered by our written 90-Day Done Right Promise, and if something isn’t right, we come back and make it right, no arguing.
How Much Does Gate Access Control Cost in McKinney?
A basic keypad replacement or single remote programming in McKinney typically runs $85 to $250, depending on the keypad model and whether we need to run new low-voltage wire from the house. Retrofitting an existing opener with a smart access module and phone app control lands between $400 and $900, and a full video intercom station with outdoor camera and indoor monitor ranges from $1,200 to $2,800 installed. What drives the price most is the condition of the existing wiring: older McKinney homes built in the 1990s and early 2000s sometimes have direct-burial wire that’s cracked and needs a new run, and that’s labor we’ll always identify before we quote.
You don’t overpay when you know what you’re paying for. We price access control jobs by the component and the labor to install or repair it, not by a vague “system package” with a market-up. Our estimates are free, written, and itemized, and we’ll show you the difference between a $90 universal keypad and a $220 OEM keypad so you can decide what fits your budget. And if you already have a written estimate from another company, we’ll give you a free second opinion so you know the work is diagnosed correctly. Compare this pricing with our Gate Access Control in Anna service if you’re on the northern edge of the county.
Gate Access Control Near McKinney - Our Service Area
Ironworks Gate Co. serves McKinney and the surrounding North Texas communities, including Prosper, Anna, Celina, our Gate Access Control in Melissa, Princeton, Fairview, Allen, Murphy, Little Elm, Lucas, and Frisco. Because we’re based right here in Collin County, most access control appointments in McKinney proper can be scheduled within one to two business days, and emergency calls are handled around the clock. If you’re not sure whether you’re in our service area, call us at (430) 226-4507 and we’ll tell you straight. We know these neighborhoods, the soil conditions that affect gate wiring, and the local code requirements for low-voltage runs, because we’ve been working these streets since 1984. Victor Salinas and the team have installed access systems on everything from modest single gates off Eldorado Parkway to multi-acre estate entries east of town.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Access Control in McKinney
Gate access control is the system that decides who can open your driveway gate and how they do it, whether that’s a keypad code, a remote, a phone app, a card reader, or a video intercom. It’s the layer between your gate opener and the person standing at the driveway, and it includes the hardware at the gate, the wiring that carries the signal, and the programming that ties it together. When it works, you never think about it; when it stops, you’re either locked out or your gate is left standing open.
Most single-component access control jobs, like a keypad replacement or adding a remote, take 45 to 90 minutes on site. A full video intercom or smart access retrofit can take two to four hours, depending on how much wire needs to be pulled and whether the existing opener’s control board needs a new interface module. We’ll give you a time window when you call, and we’ll honor it.
Expect $85 to $250 for keypad or remote work, $400 to $900 for a smart access retrofit, and $1,200 to $2,800 for a complete video intercom system installed. The final number depends on your existing opener brand, the condition of the wiring, and what features you want. Call (430) 226-4507 for an exact written quote, and remember we’ll match any estimate with a free second opinion.
Yes, we service LiftMaster and FAAC access control systems every week in McKinney, and we stock OEM and compatible parts for both brands on our trucks. We also work on BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite systems, so whatever opener is on your driveway, the right parts and programming knowledge are already here. If you’re not sure what brand you have, describe the keypad or call us from the driveway and we’ll walk you through it.
Yes, a live person answers our phone 24 hours a day, 7 days a week, including holidays, and we dispatch Emergency Gate Access Control in McKinney, TX calls when a gate is stuck open or won’t open at all. A gate that won’t close is a security issue, and a gate that won’t open is a bigger problem, so we treat both as urgent. Call (430) 226-4507 and we’ll get a technician to you as fast as the schedule allows.
Every access control repair and installation we complete is covered by our written 90-Day Done Right Promise, which means if anything isn’t right within 90 days, we come back and make it right at no charge. No paperwork, no arguing, no exceptions. That guarantee applies to parts and labor on the work we performed, and it’s been our standard since the day Victor Salinas set the company’s course.
Clear the area around the gate opener and keypad so our technician has room to work, and have any remotes or codes you currently use within reach. If you have a home automation system that ties into the gate, have the app login handy so we can test the integration. You don’t need to be home for the entire appointment, but we do ask that someone over 18 is present for the first and last ten minutes so we can review the diagnosis and the final walkthrough together.
Schedule Your Gate Access Control Service in McKinney Today
If your gate access is acting up or you’re ready to add Best Gate Access Control in McKinney, TX with keypad entry, a video intercom, or smart phone control to your existing driveway gate, call Ironworks Gate Co. at (430) 226-4507. We’ll answer in person, schedule a visit that fits your day, and give you a written upfront price before any work begins. Every job is covered by our 90-Day Done Right Promise, and our pricing includes a standing $50 discount on any repair over $250, plus a 5% senior and veteran discount, always. Call today and get the gate working the way it should.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving McKinney since 1984.