Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for McKinney Homeowners
When a gate motor quits, your driveway becomes a daily frustration. The gate that used to open with a click now sits there, dead or groaning, and every trip in and out means climbing out of the car to shove a 400-pound slab of steel. That is where we come in. Ironworks Gate Co. has been repairing and replacing gate motors and openers across McKinney for over 42 years, and most Best Gate Motor & Opener in McKinney, TX repairs are completed the same day we arrive. Call (430) 226-4507 and a live person will answer, 24 hours a day, 7 days a week. Victor Salinas leads a team of background-checked, uniformed technicians who service nine major opener brands and stand behind every job with a written 90-Day Done Right Promise.
Key takeaways:
- Gate motor and opener repair in McKinney is our primary trade, not a side job.
- Most motor failures are diagnosed and fixed in a single visit, with the price agreed before any work begins.
- We stock parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Every job is protected by our written 90-Day Done Right Promise, no paperwork, no arguing.
- Live phone support, 24/7. Not a voicemail tree, not an answering service.
What Our Gate Motor & Opener Service Includes
Gate automation is not one thing. A motor that will not start is a different problem than a motor that starts but grinds, and a slide gate has different failure points than a swing gate. Our service covers our Gate Motor & Opener in McKinney, from a new motor on a freshly hung gate to a battery backup that keeps the gate working when the power goes out. Here is exactly what falls under our gate motor and opener scope.
Motor Installation
A gate motor installation starts with the gate itself. If the gate is not hung level and plumb, no motor in the world will run smoothly for long, so we check the hinges, the posts, and the swing path before we ever bolt on an opener. Then we match the motor to the gate: its weight, its length, how often it cycles in a day, and the layout of your driveway. In McKinney homes around Stonebridge Ranch and Tucker Hill, and in nearby areas like our Gate Motor & Opener in Melissa, we regularly install motors on gates that were originally manual, which means routing power, setting the operator post, and dialing in the limit switches so the gate stops exactly where it should, every time.
Motor Repair
Motor repair usually comes down to one of a handful of culprits: a burned control board, a failed capacitor, stripped drive gears, a seized limit switch, or wiring that has been chewed or weathered. We diagnose the motor on-site, show you the failed part, and quote the repair before we touch a thing. Many McKinney repairs are done the same visit, because our trucks carry common boards, capacitors, and gear sets for the brands we service. If the motor is beyond saving, we will tell you straight and give you a written price for replacement, not a hard sell.
Linear Motor
A linear motor is the most common operator on slide gates in McKinney, especially for long driveways where a swing gate would eat up too much space. Linear motors drive a chain or belt along a track to move the gate, and they fail in predictable ways: the chain stretches, the belt frays, the motor bearings wear out, or the travel limit gets knocked out of adjustment. We set the travel limits, tension the chain correctly, and replace worn drive components before they take out the motor. We have opened and repaired hundreds of Linear brand operators and stock their common replacement parts on the truck.
Slide Motor
Slide motors carry a heavier workload than swing motors because the entire weight of the gate rides on the operator for every inch of travel. A slide gate in McKinney that drags, jerks, or stops mid-travel is usually telling you the rollers are worn, the track is dirty or misaligned, or the motor is working against resistance it should not have. We service the motor and the whole slide assembly, because fixing only the motor on a gate with bad rollers means the new motor inherits the same problem. Our slide motor work includes setting the clutch tension correctly, a detail that separates a gate that glides from one that bucks.
Intercom Integration
Many McKinney homeowners pair a gate motor with an intercom or phone-based entry system so visitors can call the house and be buzzed in. That integration lives at the point where the intercom relay triggers the motor control board, and when it fails, the motor works fine but the gate will not open from the house or the call box. We wire and configure intercom systems to work with your opener, including troubleshooting low-voltage wiring, relay settings, and control board inputs. Whether you are adding a new intercom or repairing an existing one, we make sure the voice and the gate work as one system.
Battery Backup
A battery backup keeps your gate moving during a power outage, and in McKinney, where storms through Collin County can knock out power for hours, that matters more than most people think. A gate without battery backup becomes a dead weight when the power drops, and if the opener has a manual release that has not been used in years, you may not be able to move the gate at all. We install and service battery backup systems sized to your motor’s draw, replace aging batteries before they fail, and test the whole system so the gate works when the lights do not. This is also a standard part of our $89 seasonal tune-up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We have spent four decades learning the failure patterns of the brands McKinney homeowners actually have on their driveways. LiftMaster is the workhorse we see most often, and we stock OEM control boards, gear kits, and remotes for their swing and slide operators. When a LiftMaster motor hums but will not move, the problem is almost always the capacitor or the gears, and we carry both on the truck, which is why we can usually fix a LiftMaster the same day.
FAAC and BFT are the hydraulic and electromechanical brands we see on heavier estate gates, including the custom iron work around McKinney’s larger lots and acreage properties. These units need more precise limit setting and hydraulic fluid service than the average opener, and our techs have the factory training to work on them without guesswork. We also service Mighty Mule, the DIY-friendly brand that many homeowners installed themselves, and when those fail mid-life it is often a sensor alignment or a control board issue that we can usually correct on the first visit. Whether you have one of those four brands or any of the other five we service, call us and we will tell you over the phone whether it sounds like a repair we can make that day.
Signs You Need Gate Motor & Opener Right Now
- The gate opens halfway and reverses. This is almost always a safety sensor or force-sensitivity issue, and while it might seem minor, it means the gate’s obstruction detection is triggering falsely. Left alone, it wears the motor and leaves you stuck in the driveway. We can recalibrate the force limits or replace the sensor, usually in under an hour.
- The motor runs but the gate does not move. If you hear the motor hum or whine but the gate stays put, the drive gear or chain has likely failed. Continuing to press the remote will burn the motor out completely. Shut the opener off at the breaker and call us. This is a same-day repair in most McKinney cases.
- The gate slams at the end of its travel. A gate that used to ease into the closed position and now hits the stop with a thud has lost its limit switches or their calibration. That slamming force will eventually crack a weld or bend a hinge, turning a small adjustment into a big repair. We set the limits and test the full cycle before we leave.
- The opener responds intermittently. When a gate works in the morning but not the afternoon, or from one remote but not the other, you have a wiring issue, a failing receiver, or an aging control board. Intermittent problems never fix themselves, and in McKinney’s summer heat, they tend to fail completely at the worst time. We trace the circuit and replace the failing component, not the whole system.
- You hear grinding, clicking, or rattling from the operator box. Any new mechanical sound from the motor housing means metal is wearing against metal inside. The longer it runs, the more expensive the repair. We open the unit, find the worn gear or bearing, and replace it before it scores the motor shaft or cracks the housing.
Our Gate Motor & Opener Process - Step by Step
We run every gate motor job in McKinney through the same five steps, so you know exactly what is happening and what it will cost before any work begins.
- 1
Call and talk to a person. When you call (430) 226-4507, a live person answers. We ask what the gate is doing, what brand the opener is, and whether the gate is a swing or a slide. That lets us bring the right parts on the first trip. We also book a service window and stick to it.
- 2
On-site diagnosis. A uniformed, background-checked technician arrives and checks the gate itself before touching the motor: hinges, rollers, track, travel path, and how the gate sits. Then we test the motor, control board, limits, sensors, and wiring. You see the diagnosis as we make it, and we show you the failed part if one has failed.
- 3
Written price before work. Before a single bolt is turned, you get a firm price for the repair or replacement. That price is what you pay, not an estimate that grows. If a repair is not the right call and a replacement motor is the honest answer, we show you the numbers for both and let you decide.
- 4
Repair or installation, typically same visit. Most motor repairs are completed the same day. We carry common parts for the brands we listed, and we test the full open-close cycle at least three times after the work, including obstruction detection and manual release. If we must order a part, we tell you upfront and give you a firm date for the return visit.
- 5
The 90-Day Done Right Promise. Every gate motor job, from a capacitor swap to a full operator replacement, is covered in writing for 90 days. If anything about the work is not right, we come back and make it right. No paperwork, no arguing, no fine print. That is the Keystone Standard on every job we do.
How Much Does Gate Motor & Opener Cost in McKinney?
A gate motor repair in McKinney typically runs $180 to $480, depending on what failed. A capacitor, limit switch, or sensor replacement sits at the low end, while a control board or gear set replacement lands at the higher end. A full motor replacement with installation ranges from $950 to $2,400 depending on the brand, the weight of your gate, and whether it is a swing or slide operator. Battery backup installation adds $350 to $700, and intercom integration typically runs $250 to $600 plus the cost of the intercom unit if you do not already have one.
What moves the price is mostly the brand and the gate. A heavy estate gate needs a more powerful motor than a light driveway gate, and a slide gate needs a different operator setup than a swing gate. The best way to avoid overpaying is to know what actually failed before you pay for a repair, which is why we show you the bad part and quote the repair before work starts. We also offer a free second opinion on any written estimate from another company, because a square deal means you should be able to compare apples to apples. And every customer gets a 5% senior and veteran discount, no questions asked.
Gate Motor & Opener Near McKinney - Our Service Area
We work throughout McKinney and the surrounding Collin County area, including Prosper to the northwest, Anna to the north, and Celina, Melissa, Princeton, Fairview, Allen, Murphy, Little Elm, Lucas, and Frisco. Most McKinney calls see a technician the same day, and outlying areas are typically next-day unless it is an emergency, in which case we do our best to get there the day you call. See our home page for the full list of services we provide across the region.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in McKinney
A gate motor and opener is the powered mechanism that opens and closes a driveway or estate gate automatically, using a remote, keypad, intercom, or phone app. It includes the motor itself, the control board that receives your signal, the drive mechanism that moves the gate, and the safety sensors that stop the gate if something is in the way. In McKinney, most automated gates use either a swing-arm operator or a slide gate motor on a track, and the right choice depends on your driveway layout and gate weight.
Most gate motor repairs in McKinney are completed in under two hours, and the majority are done the same day we arrive. Common fixes like a capacitor, limit switch, or sensor replacement take under an hour, while a control board or gear replacement may run closer to two hours. If a specialized part has to be ordered, we tell you before we leave and schedule the return visit for a firm date, not an open-ended window. Call (430) 226-4507 and describe the symptom, and we will give you a realistic time estimate on the phone.
A full gate motor and opener replacement in McKinney typically runs $950 to $2,400 installed, depending on the brand, whether the gate is a swing or slide, and the gate’s weight and length. That price includes the motor, the control board, the installation, and the full cycle testing with obstruction detection. We quote a firm price before any work starts, so the number we give you is the number you pay, and we offer a free second opinion on any written estimate so you can compare fairly.
Yes. We service LiftMaster gate openers regularly throughout McKinney, and we stock OEM control boards, gear kits, remotes, and sensors for their swing and slide operators on our trucks. LiftMaster is the most common brand we see in the area, and most LiftMaster repairs are completed the same day because we carry the parts. If you have a different brand like FAAC, BFT, or Mighty Mule, we service those too, along with Viking, Linear, Ghost Controls, DoorKing, and Elite.
In most cases, yes. We answer the phone 24 hours a day, 7 days a week, and McKinney calls are typically seen the same day when the gate will not open at all or is stuck open. A gate that will not close leaves your property unsecured, and we treat that as an Emergency Gate Motor & Opener in McKinney, TX, not a scheduling request. Call (430) 226-4507 anytime, describe what the gate is doing, and we will tell you when a technician can be at your driveway.
Every gate motor and opener job we do in McKinney is covered by our written 90-Day Done Right Promise. If anything about the repair or installation is not right within 90 days, we come back and make it right, no paperwork, no arguing, no exceptions. This is not a verbal promise; it is the Keystone Standard we apply to every job, from a $50 sensor fix to a full automation system.
The main thing is to clear the area around the gate and the operator so our technician has room to work, and to make sure the gate can be reached without moving a car out of the way. If you know the brand and model of your opener, have that handy, because it helps us bring the right parts. You do not need to disconnect anything or disassemble anything; leave the system as it is so we can diagnose the actual failure, not a failure caused by someone moving wires around. We will handle everything from there.
Schedule Your Gate Motor & Opener Service in McKinney Today
If your gate motor is failing in McKinney, call (430) 226-4507 now. A live person will answer, ask what the gate is doing, and get a technician scheduled. Your estimate is free, the price is agreed before we start, and the work is backed in writing for 90 days. Something else you may want to look at is our Gate Motor & Opener in McKinney page for a fuller picture of how we approach this work. One call and the gate works like it should again.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving McKinney since 1984.