Ghost Controls Gate Installation Nationwide

Ghost Controls Gate Installation in McKinney: What to Know First

Ghost Controls gate installation in McKinney is a specialty we handle regularly, and the honest answer on timing is this: most opener installations and full gate builds take one to two days on site, depending on whether we’re working with an existing gate or fabricating new steel. We’re an independent Ghost Controls service provider, not a factory shop, which means we quote the work upfront and settle the price before a single bolt is turned. If you own a Ghost Controls opener and need it installed on a new or existing gate in McKinney, call us at (430) 226-4507 and we’ll give you a straight number.

Call (430) 226-4507

This page is written for McKinney homeowners who already bought a Ghost Controls kit, are considering one, or have one bolted to a gate that never worked quite right from the day it went in. Victor Salinas has been working on gates across Collin County since before half the subdivisions off Eldorado Parkway existed, and he’ll tell you the same thing we tell every caller: the opener matters, but the gate it’s mounted to matters more.

How Ghost Controls Products Fail, and How We Fix Them

Ghost Controls makes a solid residential opener. We install and service them. But like any brand, they have patterns. Here’s what we see in McKinney driveways and what we do about it:

• AXDP and R-Series arm binding on heavy gates. The Ghost Controls articulated arm is rated for a specific gate weight and leaf length. When a McKinney homeowner hangs a heavy cedar or steel gate on the edge of that rating, the arm flexes out of plane and the limit switches lose reference. The symptom is a gate that beeps, stops mid-travel, or reverses for no reason the owner can find. We re-engineer the mount point, add a structural backing plate, and reset the travel limits with the gate actually moving under load, not bench-set.
• Phantom open/close activations on the TSS1 and TDS2 openers. This is the call where the homeowner says the gate opened by itself at 2 a.m. Nine times out of ten it’s not the board. It’s a control wire nicked during the original gate installation, picking up stray voltage from the intercom or landscape lighting circuit. We trace the wire run, isolate the short, and button it up. The board stays.
• Solenoid lock fighting the opener on double gates. Ghost Controls double-gate installations use a sequenced opening logic. If the solenoid lock on the trailing leaf is wired to the wrong aux output, the opener tries to pull against a locked gate. That burns boards and strips gears. We see this on DIY installs and on jobs where a handyman “did the electrical.” We rewire the lock to the correct relay, verify the open/close sequencing, and test it ten times before we call it done.
• Battery backup swelling in McKinney heat. The Ghost Controls battery backup units sit in a plastic housing on the post, in full Texas sun. We replace swollen or dead batteries every season. The specific failure we see is a battery that reads full voltage at rest but collapses under load, causing the gate to open halfway and die. Our fix is replacement with a properly rated sealed battery and, where the post allows, repositioning the housing to the shaded side.
• Remote range shrinking over time on single-button transmitters. Owners notice they have to pull right up to the keypad before the gate moves. This is usually a receiver antenna routed poorly or pinched behind the post cap. We remount the antenna with a clear line of sight and retune the receiver. On older R-Series units, we’ll also check for cracked solder joints on the receiver module, which is a known weak point on the 2016-2019 production years.

Our Ghost Controls Gate Installation Process

Here’s how a Ghost Controls gate installation job goes when you call Ironworks Gate Co. in McKinney:

1. 1
   Call and talk to a person. You reach us at (430) 226-4507, day or night. We ask what opener you have, what the gate is made of, and whether the gate itself is square in its frame. That last question saves a lot of wasted trips.
2. 2
   We come out and measure. Gate leaf weight, hinge condition, post plumb, throw distance, power availability. We don’t install a Ghost Controls opener on a sagging gate and pretend it’ll hold. If the gate needs steel work, we say so and quote it.
3. 3
   We settle the price before work starts. You’ll know the number, the parts, and the labor. OEM Ghost Controls parts where the warranty matters, quality aftermarket where it doesn’t. No surprises on the bill.
4. 4
   Installation and wiring. We mount, wire, program the limits and force settings, and sync every remote, keypad, and safety sensor on site. We run the power correctly, with proper conduit and a dedicated circuit where code requires it.
5. 5
   Load testing and tuning. The gate cycles fully open and closed under real weight, in real McKinney heat, with the safety edges and photocells deliberately obstructed to confirm they stop the gate. We don’t leave until it’s right.
6. 6
   Walkthrough and the 90-Day Done Right Promise. We show you how everything works, give you the written guarantee, and clean up after ourselves. If it’s not right within 90 days, we come back and make it right. No paperwork, no arguing.

What Ghost Controls Gate Installation Costs in McKinney

Here are real price ranges we quote in McKinney for Ghost Controls work. These assume an existing gate in serviceable condition.

• Single swing gate opener installation: $1,100 to $1,900, including opener, mounting hardware, two remotes, and full setup.
• Double swing gate opener installation: $1,800 to $2,900, depending on gate weight and whether we’re adding a solenoid lock.
• Sliding gate opener installation: $1,400 to $2,400, with chain or rack drive.
• Full new gate build with Ghost Controls opener: $4,500 to $9,000 and up, depending on steel design, size, and finish.
• Existing Ghost Controls opener repair: $180 to $650, with the $50 Off Any Repair Over $250 standing offer applied where eligible.

What moves the price: gate weight, post condition, distance from the house to the power source, and whether we’re building or reinforcing anything. You’ll always get the number before we start. Call (430) 226-4507 for a free estimate, and ask us about the 5% Senior and Veteran discount.

Why McKinney Homeowners Call Ironworks Gate Co. for Ghost Controls Work

We’ve been fixing and building gates in McKinney since 1984. That’s over four decades of watching openers come and go, hinges wear out, and Texas weather do what Texas weather does. We’re trained and equipped on nine gate-automation brands, Ghost Controls included, and alongside LiftMaster, Mighty Mule, and DoorKing. That matters when a Ghost Controls board is on backorder and you need a real fix today, not in three weeks.

Every job we complete carries the 90-Day Done Right Promise, in writing. We show up in uniform, background-checked, and we treat your driveway the way we’d treat our own mother’s. A live person answers the phone 24 hours a day, 7 days a week. And if the gate ever moves when it should not or stops when it should, we will find out why.

FAQs