Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFAAC Gate Access Control in McKinney: What to Know First
FAAC gate access control in McKinney runs about $180 to $650 for most repairs, and we complete the large majority of them in a single visit. We’re an independent FAAC service provider, which means we work on the equipment already on your driveway without steering you toward a full replacement unless the board or motor is genuinely finished. Most homeowners call us because their keypad stopped accepting codes, the receiver quit talking to remotes, or the gate opens on its own. We fix all of it.
This page is for McKinney homeowners who own a FAAC gate system or are considering one, and want straight answers on how these systems age, what fails, and what a repair actually costs. If you’re standing at the keypad right now and nothing is happening, call (430) 226-4507 and we’ll walk you through a few checks before we even schedule a truck.
How FAAC Products Fail - and How We Fix Them
FAAC builds durable operators. The 400, 422, and 750-series swing arms and the 844 and 391 slide operators are common on McKinney driveways and hold up well in Texas heat. But the access control side ages faster than the mechanical side. Here’s what we actually find when we open the box.
- Photon and E024S photocell drift from McKinney sun exposure. These safety beams sit in direct afternoon sun for years. The housings fade and the lenses cloud, and the system suddenly thinks something is in the gate path. The gate refuses to close, or reverses mid-cycle for no reason. The fix is usually a re-aim and lens cleaning, or a $40-to-$90 sensor replacement rather than a new board.
- The 455 D control board loses receiver signal after storms. North Texas thunderstorms bring close lightning strikes and power surges. On FAAC 455 D boards, the onboard receiver is sensitive, and we regularly replace scorched receiver modules in McKinney after spring storm season. A surge protector installed at the board costs less than $50 and prevents this on the next strike.
- XP 20 and XP 30 keypads stop reading codes cleanly. These keypads use a rubber membrane over the keys. After several Texas summers, that membrane shrinks and hairline cracks let dust and moisture in. Codes fail intermittently, and the owner assumes the board is dying. A keypad replacement usually solves it, and we keep OEM and quality aftermarket units on the truck.
- FAAC remotes lose programming after power cycles. On older FAAC systems, a brownout or a breaker trip can dump the remote memory. Homeowners call us saying every remote died at once, but the system just forgot them. We reprogram and then address the power issue so it does not happen again next month.
- Loop detectors under the driveway fail and the gate thinks a car is always there. FAAC systems use induction loops to hold the gate open for exiting vehicles. In McKinney’s clay soil, which shifts with moisture, those loop wires crack underground. The gate stays open or reopens for no visible reason. We test the loop circuit before touching anything else, because replacing a loop means cutting a new saw slot in the driveway and it should not be done on a guess.
Our FAAC Gate Access Control Process
Most FAAC jobs we finish in one trip, because we carry the common parts and we do not guess. Here’s how a typical call runs.
- 1
Phone diagnosis. A live person answers. We ask what the gate is doing and what the keypad or remote is showing, then tell you honestly whether this sounds like a quick fix or a service call.
- 2
On-site testing. Our tech checks the board, receiver, safety beams, limit switches, and power supply separately. FAAC systems are modular, and the symptom rarely points to the real cause. We test until we know.
- 3
Plain diagnosis and price. We tell you what we found, what it costs, and what the options are, if there are options. The price is agreed before a single part is ordered or a screw is turned.
- 4
The repair. We use OEM FAAC parts where it matters and where the equipment is still under FAAC’s warranty. Where an OEM part is not available or not worth the cost, we use quality aftermarket parts and tell you that before installing them. No surprises.
- 5
Full cycle test. We run the gate through every access method you use: keypad, remotes, phone entry if present, card readers, safety-reverse, and the manual release. We stand there and watch it fail or pass.
- 6
Cleanup and the written guarantee. We leave the site clean and you get the 90-Day Done Right Promise in writing. If something is not right, we come back and make it right. No paperwork, no arguing.
What FAAC Gate Access Control Costs in McKinney
Here’s what we quote for the most common FAAC access control repairs in McKinney, so you have a real number before you call.
- Keypad replacement (XP 20, XP 30 or compatible): $180-$390 installed
- Receiver replacement or external receiver add-on: $150-$320
- Photocell replacement or re-aim (Photon, E024S): $90-$180
- Remote programming (up to 4 remotes): $80-$140
- 455 D board repair or replacement: $350-$650
- Full phone entry or video intercom integration: $500-$1,400
What moves the price is the age of the board, whether the wiring from the house to the gate is intact, and whether we’re adding a component that was never there before. Every estimate is free and every price is fixed before work begins. Call (430) 226-4507 and we’ll give you a real number.
Why McKinney Homeowners Call Ironworks Gate Co. for FAAC Work
We’ve been doing this work for over 42 years, and we’re the shop that other contractors in Collin County call when a FAAC system stumps them. Victor Salinas grew up off Eldorado Parkway and still runs the company from McKinney. We treat your gate the way we’d treat a gate we had to drive through every day for the next twenty years.
If your FAAC system is beyond repair, or the repair does not make financial sense, we also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing so you can make a decision with real options in front of you. Every job, including a FAAC access control repair, is covered by our 90-Day Done Right Promise in writing. A live person answers the phone 24 hours a day, 7 days a week. And we do not charge for work that does not need doing.
FAQs
Yes, in most cases. We keep common FAAC boards, keypads, receivers, and safety sensors on the truck, and a single visit is the norm rather than the exception. Call (430) 226-4507 and we’ll tell you straight whether this sounds like a same-day fix or a scheduled appointment.
It can, if the unit is still under FAAC’s original warranty and the aftermarket part causes the failure. We flag warranty status before replacing anything, and use OEM FAAC parts where the warranty is still active and where the part quality justifies the price. You’ll know before we turn a wrench.
A FAAC keypad replacement in McKinney runs $180 to $390 installed, depending on whether we’re matching an existing XP 20 or XP 30 or upgrading to a compatible keypad with newer features. The estimate is free, and the price is fixed before the work starts.
It is a safety issue, yes. A gate that opens on its own means the safety circuit, the loop detector, or the board is misreading something, and you should not ignore it. In McKinney, where wind gusts and storm debris are common, a gate that opens unexpectedly can hit a car or a person. We’ll find out why and fix it. As Victor says, if it moves when it should not or stops when it should, we will find out why.
Most repairs take one to two hours on site. Board-level diagnostics and loop testing can push that longer, but we tell you before we start what the time looks like. We do not charge by the hour for exploratory work, and the price is set before we begin.
If your FAAC gate access control is acting up in McKinney, call Ironworks Gate Co. at (430) 226-4507 for a free estimate. We answer the phone, we show up when we say, and the price is set before any work starts.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving McKinney and nearby areas.